Any Interest in Fog Light Lens Protector and Non Slip Pads for the Dash and Console?

[pilotpads]

I make a set of non slip pads for the Honda Pilot, Honda Odyssey, Honda Ridgeline, Toyota Sienna, Toyota RAV4, and the Scion xA and xB. Checking with members here to see if there is an interest in my product for the new CR-V. If you are interested, please post to this thread.

For more information about who I am and the products I make, check out my ebay "About Me"

http://members.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewUserPage&userid=padsplus

Here is a couple of pics of prototype pads I made for the CR-V.

[rtachner]

Rather than fog light protectors, I would be interested in a panel that allows for two 7 prong receptacles for my connection from the motor home to the CRV tail light and brake controller. I flat tow the Honda behind the motor home and Honda does not allow for these connections. I have to make my own-- which is a pain.

[T Mac]

And if you're going to plan on selling here, contact me so we can work out an advertising arrangement. Thanks.

[pilotpads]

Looks like Honda made two different center consoles for the CR-V. This one is on the EXL model. Looks like it can use a pad for the dual cupholder and covered bin.

[pilotpads]

The large lower bin in the center console is already rubberized. So, no plans to make a pad here

[pilotpads]

Upper glove box is also rubberized. No plans for a pad here either.

[pilotpads]

Planning on making a pad for the lower glove box.

[pilotpads]

Planning on making pads for the front and second row door handle bins.

[pilotpads]

Planning on making pads for these two dash bins.

[pilotpads]

Planning on making pads for the front and second row door bins.

[pilotpads]

Any need for a pad here by the speedometer?

[pilotpads]

Looking for feedback and suggestion on these pads. If I missed any pads, let me know. If you are interested, please post to the thread or send me a PM.

[pilotpads]

Pads are for 2007 Honda CR-V are now available. This is a 23 piece set. Price is $25 + $8 S/H. If interested, send me a PM for payment details or go to my ebay store http://stores.ebay.com/PadsPlus?refid=store

Here's what you get:

Front passenger seat slide out tray
Lower glove box
Upper dash bin
Lower dash bin
Dash bin left of steering wheel
Under the radio bin LX only
Center console small tray LX and EX only
Center console covered bin EXL only
Center console dual cupholder
Front door handle bin, left and right
Front door cupholder, left and right
Front door large lower bin, left and right
Front door small lower bin, left and right
Second row console cupholder
Rear door handle bin, left and right
Rear door cupholder, left and right
Rear door lower bin, left and right

[pilotpads]

If you would like a sample of the pads. Just send me a PM with your address. Here's a couple of more pics.

[pilotpads]

If you have the LX model, I have a pad for under the radio.

[Webqueen]

I ordered a set of these 2007 CRV pads for my new EX, and they all fit perfectly! They came with very thin double-sided mounting tabs to make them stay put, especially the ones located in the cupholders on the console tray and the doors.

Nice quality and they quiet things down!

Webqueen

[pilotpads]

Just opened an ebay store for the holidays.

http://stores.ebay.com/PadsPlus?refid=store

[pilotpads]

Just added another pad to the set I make. This is for the dash bin just left of the steering wheel.

[pilotpads]

Gotten a request to make a few more pads for the CR-V. Even though the large console tray in the LX and EX is already rubberized, mine is a lot softer and non slip.

http://i36.photobucket.com/albums/e4/pilotpads/lxellargeconsoletray.jpg

Also made a pad for the upper glove box which is also rubberized.

http://i36.photobucket.com/albums/e4/pilotpads/upperglovebox-2.jpg

And if you utilize the front of the speedomenter for storage, I have a pad for that too.

http://i36.photobucket.com/albums/e4/pilotpads/speedo-1.jpg

[2RedV's]

Looks good. I like the color matching you did.

[GordonFan]

I put on and subsequently removed a chrome license plate frame from the rear of my 'V. Even with the cushions on the paint, once tightened down, the chrome frame was touching the paint.

A nice ~1" x license plate length piece would work great for this for a 3m urethane paint protector piece.

[Luwin1026]

Just received a set of the pads for my sister's 2007 CR-V (LX) - here are a few pics -


They came neatly packaged, with a sheet or instructions, a good number of double-sided sticky squares, and the pads were all clearly labeled.

http://luwin.smugmug.com/photos/220579060-M.jpg


Here are all the pads laid out -

http://luwin.smugmug.com/photos/220579360-M.jpg


And a few of them installed - (the white stickers indicating where they go are easily removed - pictures taken with them on for reference purposes) -

http://luwin.smugmug.com/photos/220579520-M.jpg

http://luwin.smugmug.com/photos/220579655-M.jpg


As I have the pad set for my 2006 Pilot, I knew exactly that these are wonderful, great quality, and extremely useful. My sister installed them in her CR-V, and has commented that installation was a breeze, the fit is excellent, and they will prove to be useful.

Excellent product, highly recommended!!

[kipnita]

Pilotpads console pads are great!

I ordered a set for my EX CR-V console table.

The rattling from the rivets of my Leatherman case was driving me nuts. Now......quiet bliss.

Another benefit, things on the console are less apt to slide off the console during "normal" driving.

I would not hesitate to do business with PilotPads again.

[AnaMayShun]

Any chance you can make these for the 05 CR-V EX ?