Need DIY Fog Light write up

[Wiu-Bimmer]

Planning on installing myself the Honda fog light kit for a 2007 CR-V. Any feedback, experience and word of advise would help and would be appreciated. Thanks

[Greenzter]

Several mail order companies, including H and A, have installation instructions available on-line.

[mickeysc]

I was think of doing an install also. When you do this install could you do a short write up of the install. Like how long it took and any problems you came across. H and A has the installation instructions on line in a form of a PDF.

[Wiu-Bimmer]

Thanks for the prompt replies, I have the .pdf install instructions from H and A. By experience, these instructions usually leave out lots of little details. I will attempt to do it and document/take pics of the steps. Couple of things I'm worried about is the cutting part for the fog light housing in the bumper and the bumper removal.
In the meantime, if anything can post some tips, that would help (Like how to make those holes in the bumper easier)

[KEVismyhandle]

Thanks for the prompt replies, I have the .pdf install instructions from H and A. By experience, these instructions usually leave out lots of little details. I will attempt to do it and document/take pics of the steps. Couple of things I'm worried about is the cutting part for the fog light housing in the bumper and the bumper removal.
In the meantime, if anything can post some tips, that would help (Like how to make those holes in the bumper easier)

goodluck! show us the pics and steps that you will do. thanks. :D

[Bimmer Pilot]

http://www.hondapartsdeals.com/HondaInstallGuides/CR-V/2005/2005CRVfoglights.pdf

[06crv]

I bought a set of fogs on ebay but it doesnt come with install instructions. I read the install instructions on hondapartsdeals but it doesnt specify how to route the harness into the vehicle in able to plug into the fusebox. Can anyone help me with this?

[kikoem]

http://www.youtube.com/watch?v=m9jaC8Q0tsw

try this vid.

[06crv]

That didnt really help either b/c it didnt show how to bring the harness inside the car, it jus shows to plug into the 1-pin connector and after that they just go to the inside and do all this junk. I already mounted the fogs and all but up to the wirings, I am lost...

[mickeysc]

http://www.diyhonda.com/2007/04/podcast-episode-57-honda-cr-v-fog-light.html

Go to this web site and there is a video of the install of the fog lamps. There are other videos also. Found this site while doing a search last week. Very helpful. It is done by a honda dealer in Ohio. They also sell parts discounted such as Hanna honda.

[06crv]

Sry but I have an 06 crv and those wirings are not the same as what I have.

[ptrhang]

I have an 06 too, can anyone find a video on fog light install on 2nd Gen Vs? all the videos I find are for 3rd gens

[Serj22]

There is also a pictorial DIY in our DIY CENTER on how to wire up the 07 foglights.

as for the 06, that may be a little harder to come by, but once i hook fogs up to my 02, I'll let you guys in on yet another one of my DIY's.