Honda CR-V Owners Club Forums banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
adjusting
1-10 of 19 Results
  1. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    I vaguely remember a post that notes what direction to turn the adjustment screw, but I couldn't find it. I want to lower them a bit? So, which direction lowers them - clockwise/counterclockwise ? ... Thanks! Sent from my SM-N960U using Tapatalk
  2. Tires, Wheels, & Suspensions
    '99 CRV. 225/75/16 tires, STOCK springs but with NEW struts all around. Adjustable toe arms, Adjustable upper camber arms 1.5" lift in front (went together fine and looks great! wheel centered in wheel-well.) Rear is 2.5" spacer above said new strut assy. And when I put it in, it pulls the...
  3. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    I bought this car about a month ago and had the top end rebuilt due to burnt valve. Has around 13000 on the clock since this was done. The car ran perfectly fine getting nearly 30 mpg. Decided to check the valves today and glad I did. Overall, the mechanic that did the work did a pretty good...
  4. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    My 2003 gen II auto has 150,000 miles on the clock and the steering has been terrible for a while (shame on me). Oh and there is a rattle when I go off paved roads (read, tracks in the woods, down on the beach, gravel roads to cabins etc.) which I do a lot, (as I live in Norway). I replaced...
  5. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Has anyone been able to adjust the outside temperature indicator? Per Pg. 120 of the Owners Manual with the ignition switch in II position, press & hold the trip indicator knob to enter the temp adjustment mode. I've had no luck enabling this mode no longer how long I hold the knob down.
  6. Gen 3: 2007-2011 (UK 2008-2012) CR-V
    I think someone bumped into my car while I was in a supermarket, I found the left front side of the bumper got shifted a bit. Is it something I can fix myself? please provide instructions. Thanks.
  7. Miscellaneous / General CR-V Discussions
    What type feeler's gauge (and where can I get one) does it require to adjust valves after head is redone? The shop where my 1999 CRV is being repaired said they need a special feeler's gauge and can't readily find one. Thanks in advance for responding.
  8. Do-It-Yourself / Mods
    Well, I did it. The one DIY I know a lot of people want. There was one on the EOC and that was how I did this one, enough info to get most of it done. I got pictures of mostly all of it. So here goes. What you need: Feeler Gauges ($8.00) 10mm socket/ socket wrench Flat head screwdriver 19mm...
  9. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Well, I did it. The one DIY I know a lot of people want. There was one on the EOC and that was how I did this one, enough info to get most of it done. I got pictures of mostly all of it. So here goes. What you need: Feeler Gauges ($8.00) 10mm socket/ socket wrench Flat head screwdriver 19mm...
  10. Do-It-Yourself / Mods
    so is it impossible to do it on a 2000 honda crv?
1-10 of 19 Results
Top