Search Results for ‘arm’

Im a new member to the forum but have been trolling it for 3 years.I have gathered a huge amount of valuable information from this site so I felt that I owed it to everyone to share my find. The 2000crv that I inherited had a driver side arm rest but not one on the passenger side. To make my...

Hello all, I have a 2008 CR-V EX-L and am very tall, so I sit as far back as I can in the seat and leaned back pretty far. But even with the steering wheel extended as far out as possible, while leaning back in the seat my elbow doesn't rest well on the flip down arm rest, if it were 2-4...

Hello. I have a 99 crv 2 inch lift in the rear 1 1/2 in the front, 215/75r15 ko2 all terrain, 1 1/2 wheels spacers all 4 corners, Jerry If anyone is familiar with the http://www.coloradomountainrally.com/store/p19/97-01_CRV_Camber_Correction_With_OE_Control_Arms.html kit id like some help. I'm...

Hello All! First time poster, however been reading through the forum as a guest for some time now, really appreciate all the great information and support! Looking for some advise to validate pricing to ensure I am not getting ripped off. I al already in the process of getting a few quotes and...

can it be done by a non mechanic like me/

I can see in a few month the center arm rest could get dirty. Any suggestion for a cover that I toss in the laundry ever month or so?

Hello. my mom got a a 2007 honda crv , that needs new rear bushings since they all dried out. here what it comes down to a.new Trailing arms - 300 per side (but this way i still have to buy bushings that are not on the control arm.) b.new bushings - would be around 50 bucks per bushing and...

I was changing the oil yesterday and I saw condensate water dripping directly on the lower control arm bushing. The water runs down the circular bushing and pools at the bottom, and appears to seep into the bushing itself. There appears to be corrosion forming in the bushing at the bottom as...

We have 2008 CR-V 4WD EX-L. When we had the tires rotated there was wear on one rear tire which was moved to the front. The tire guy said we should take it to a good repair shop that does alignments. We took it in to a tire store and had a 4 wheel alignment done last week. They said that the...

I have a black fabric interior in my '18 EX. The driver door arm rest looks like it was specifically designed to attract and display any bit of skin cells that drop from my left forearm and elbow. Aside from removing the door panel and replacing it (Complicated and expensive) does anyone have...

https://www.ebay.com/itm/Seat-Armrest-Real-Leather-for-Honda-CR-V-07-09-Gray-Stitch/172142203348?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20150313114020%26meid%3D4f74b04163ba4a1b8f9dc891d48bc703%26pid%3D100338%26rk%3D15%26rkt%3D30%26sd%3D222109302207...

Thought it was be a simple process to remove the rear trailing arm and replace the bushings. Got all the bolts removed but one. Head snapped right off. Guess Ill be pulling the whole rear assembly and cutting and drilling out the remainder. i had to bend the small plate that was blocking...

I'm currently replacing rear hubs and bearings. Got everything apart except I couldn't get the rear aligning cam bolt out of the bushing. It must be seized. I was going to cut it, but I can't find them online? Are they actually cam bolts? Or can I use a standard bolt? I took the nut off and...

Hello everyone! New to the club. :) Just bought a new CR-V and wondering if the rear wiper arm will survive a car wash. Anyone had a problem with them being broken while driving through a car wash? If so how do I remove it before I get it washed? Thanks to all! :)

Both my wife and I find the center sliding armrest a PIA. It slides too easily. We've had them in other vehicles but they all has a lever to pull to move it where you wanted it, then it stayed put. This thing goes shooting up or back with the slightest pressure applies on the top. Has anyone...

Hello This is my first post on site. My 2004 CRV front lower control arm bushes are on an advisory for the mot. I have checked on youtube how easy it is to replace them (not). Even with a 20ton press and the correct tools it seemed to take the guy an age to replace them. He suggested just...