Honda CR-V Owners Club Forums banner


  1. 2004 Honda CRV Headlight assembly

    Gen 2: 2002-2006 CR-V
    Hello friends! I am new to the forum as I just purchased a 2004 Honda CRV from a friend that is in incredible conndition. Are there any headlamp assemblies that would be brighter than the existing stock ones I have in the EX? Xenon perhaps (as in my Saab 95 Aero)? The headlights are very...
  2. 2008 Tail light assembly removal

    Problems & Issues
    How do I remove the tail light assembly to check for bad bulbs? I removed the two covers and the two screws, and the assembly is loose. I've pushed and pulled in every direction I can think of but it won't come off the car. I don't want to break anything... Underlying issue is the two main...
  3. Plastic rivets that hold rear light assembly in 2007 CR-V

    Gen 3: 2007-2011 CR-V
    So I replaced a brake bulbs in my 2007 CR-V. Well the plastic pieces are starting to get a little brittle. I broke 3 out of the 4 covers that cover the mounting screws and 1 of the plastic rivets that are mounted on the lamp to help align the lamp to the car broke. I have looked everywhere...
  4. 2010 CRV Shock Assembly Suggestions

    Tires, Wheels, & Suspensions
    Hi, I have a 2010 CRV EX-L with 156K on it. It has the original shocks on it and they are overdue for replacement. I've used only OEM parts so far but with the mileage, I really don't want to spend the extra money if I don't have to on higher ticket items like these. Even with a discount, the...
  5. Gearbox assembly

    Gen 3: 2007-2011 CR-V
    Hi, My 2007 CRV gearbox assembly needs to be replaced according to the service advisor of Honda Cars. Can this component be repaired instead of replacing the whole assembly? Thanks in advance for your input.
  6. Final Assembly Point?

    Gen 5: 2017-Present CR-V
    I have a 2017 Touring 2 Wheel Drive, and a problem..... I noticed something sticking out of the bottom of my car yesterday, and upon closer inspection, found that the metal shield that has to be removed before an oil change was busted. Don't know how it got that way, but the 2 center bolts...
  7. 2004 Sun Visor falls out of main assembly

    Problems & Issues
    A few months ago I purchased a 2004 CRV. The car behaves admirably except for one minor problem: every time I pull the driver's side sun visor down, it completely falls out of its main assembly. I am able to push it back in, but it keeps popping out again. It seems to be held in with plastic...
  8. 1998 crv front axle assembly

    Gen 1: 1996-2001 CR-V
    Purchase a right front axle complete from Ad Auto, no sooner then a couple miles it popped out , called the store and told me, basically there junk. I needed to buy a honda oem. when I checked pricing they were thru the roof. Is there any aftermarket brand that will work, need ideas, thanks 1998...
  9. Condenser fan assembly question

    Maintenance and Service
    I am needing to replace the condenser fan assembly. My question is the replacement fan assembly from the auto parts store has does not include the small control box that connects the wiring to the motor itself. I other words the wires from the motor feeds into a small control box at the top of...
  10. Replacing Remote Radio Assembly

    Do-It-Yourself / Mods
    Hello All - This is the first time I am posting. While in FL this winter the remote radio assembly switch on the steering wheel stopped working on my 2012 CRV. The remote radio assembly controls the radio volume, can change the station and source of the music. I took it to a Honda dealership in...
  11. 2008 Cr-V Automatic transmission solenoid crimp failed, can I take off the assembly?

    Maintenance and Service
    My car was in an accident, engine, transmission, and suspension weren't harmed, except that the radiator pushed one of the transmission solenoids off the crimp. These are part numbers 28260-PRP-014 I dont know if it's the poor design of these parts, of they are meant to be break-away like...
  12. coin tray assembly for 2003 crv

    Gen 2: 2002-2006 CR-V
    My coin tray pulled out and fell apart. There is a curved metal top, the drawer, and 2 spring hinges which all appear to be intact, However I have no idea how to put it back together. My husband did something to put it back in and it is staying, but the curved cover is in the wrong position...
  13. Did 2010/2011 Turn Signal Switch assembly can install on 2007 CRV?

    Do-It-Yourself / Mods
    I purchase fog light kit p/n: 08V31-SWA-100A Honda CR-V Fog Light Kit at cheap price. I just want to make sure did anyone know the 2010/2011 Turn Signal Switch assembly can install to 2007 Honda CRV or not before I install it or I need mod it in order to install it on 07 CRV? Thanks help :)
  14. 2006 tailgate latch assembly backplate fell off

    Problems & Issues
    The receiving latch built into the door frame fell yesterday. Have the latch itself and both screws. Looks like there’s a backplate that must have fallen into the frame. Does anyone know how I can get into the frame below the rear left side of the car? Kinda looks like the bumper needs to come...
  15. Are there any plug and play headlight assembly options for the 205 that don't use the

    Do-It-Yourself / Mods
    So while visiting my daughter at her University city/town, I wanted to change out the light bulbs to a brighter, better lux bulb. I recently replaced the left headlight assembly and completely hate the spring wire piece that holds the bulb and composite plug in bulb system. The latch part had...
  16. 2004 - Actuator Assembly Parts

    Problems & Issues
    Hello, The locks on 3 out of 5 doors (both passenger side doors and the tail door) on my 2004 CRV (EX 4WD 4 Speed Auto Transmission) do not work with the remote or the master lock switch on my driver door. They work fine with my keys (at least the doors that have keys) and they also work...
  17. 05 CRV - VSA + P2647 - Replaced VTEC Spool Assembly - no luck HELP!

    Problems & Issues
    A few weeks ago we got a scheduled oil change for my girlfriends 2005 CRV (165,000 miles). The following day, her CEL and VSA light came on with the P2647. I did some research on this forum and determined it was likely the VTEC spool valve assembly or pressure switch as many others have found...
  18. Did Honda redesign the tailgate latch assembly in the 08 New part doesn't fit right !

    Problems & Issues
    My 2008 CR-V had problems with the tailgate latch assembly. The internal springs were broken, and the plastic coating on the locking assembly was torn and shredded. So I picked up a replacement part ( 74800-SMG-E01 ). But.... The part is DIFFERENT ! It takes 8m bolts instead of 6m bolts. It no...
  19. Can you Replace lower Garnish Assembly on EX Model with One from a Touring Model ?

    Gen 5: 2017-Present CR-V
    Can I swap out the right & left Door lower garnish assembly on an EX Model and replace it with the part from A Touring Model? I have an EX Model with the black Hockey stick shape in the middle of the lower garnish assembly and I want to put a Touring garnish assembly on the EX ..because the...
  20. Installing HID headlight assembly on 07-11 CRV?

    Do-It-Yourself / Mods
    Has anyone installed a set of these on a 07-11 CRV? I did read the HID retro fit DIY but this seems to be plug and play using LED bulbs...