Honda CR-V Owners Club Forums banner

bracket

  1. 1998 Motor Mount Upper Drivers Side not fitting

    Problems & Issues
    Hello, I've had my CR-V for about 3 years now I think, and the previous owner saw me coming... among the many issues I've found the upper drivers side motor mount was removed, along with the metal bracket that attached the mount to the lower bracket, and instead a plate was used to bridge the...
  2. Front license plate bracket.

    DIY Center Discussion
    Any one have diagrams or instructions for installing the front license plate bracket on a 2018 Touring.
  3. 2004 Vapor Canister Mounting Bracket and fasteners

    Problems & Issues
    Trying to fix an EVAP Engine Code, and found leaking around the 2-way valve... Long story short: I live in New England about 50% of all fasteners are rusted solid and break off, causing me to replace items that weren't broken in the first place. I now am replacing the whole canister and the...
  4. Front license bracket

    2017 - Present Official Specs, Features, Etc. (Gen
    Anyone know any where I can find instruction on how to install the front license bracket? Does it need to be drill into the bumper? Are there any sensor in the front for Touring model?
  5. Pad retainers on the front disk brakes (caliper bracket)

    Greetings & Introductions
    How do I tell the difference between the upper and lower pad retainer to install them correctly. The ones now on the caliper brackets are different on the bottom left of the vehicle and the side bottom right of the caliper of the vehicle?
  6. Tips for removing the lower left mounting bracket for 1st gen CRV.

    Maintenance and Service
    Hi all, I need to replace my left front mount for my 1st gen CRV. Apparently the bolts that hold the mount to frame are not only very likely rusted in, but are attached to 18mm nuts WELDED (!?) on the back side of the frame. Just like this video (https://www.youtube.com/watch?v=Kh9HUN--LcQ)...
  7. 2005 CRV wing mirror bracket drivers side

    Problems & Issues
    Hi All I have bought myself a 2005 CRV cosmic grey. I have an issue with the drivers side wing mirror. the actual mirror is taped onto the black bracket and works great. not ideal though! so I untapped it to find that the assembly inside the mirror has a bracket that attaches to the black...
  8. UK 98 R Intermediate Driveshaft bracket problems

    Problems & Issues
    Hi folks first time owner and DIYer of a CRV just doing a few repairs and had the inner cv boot split on passenger side incorperating the intermediate driveshaft. Managed to split the 2 shaft but got a new shaft anyway. Put new seals on transmission and new bearing and seal on inter shaft. Big...
  9. radiator support bracket part #

    Problems & Issues
    Have an 02 CRV-EX 4WD, 161k. Bought from a person who hit a deer, and now I'm putting it back together. Somehow I didn't wind up with the passenger side upper radiator support bracket--the one that connects it to the crossmember. Have checked in my rural area and no junk yards I know have any...
  10. radiator support bracket part #

    Maintenance and Service
    Have an 02 CRV-EX 4WD, 161k. Bought from a person who hit a deer, and now I'm putting it back together. Somehow I didn't wind up with the passenger side upper radiator support bracket--the one that connects it to the crossmember. Have checked in my rural area and no junk yards I know have any...
  11. Front license plate mounting bracket installation instructions on 2013 CR-V

    Community Help
    I just purchased a 2013 Honda CR-V and there were no installation instructions in the bag with the front license plate mounting bracket. I am reluctant to start putting screws into the bumper without seeing some sort of instructions. Does anyone have a link to were to find instructions? Thank...
  12. Front Bumper License Plate Bracket for 2006 Honda CR-V

    Miscellaneous / General CR-V Discussions
    Hello. I am hoping someone on this forum will be able to assist me. I recently purchased a used 2006 Honda CR-V SE. This is actually my second CR-V. I love the car. I am trying to put a front license plate on the vehicle, but have run into a problem. The normal place area on the bumper where the...
  13. Front Bumper License Plate Bracket for 2006 Honda CR-V

    Exterior
    Hello. I am hoping someone on this forum will be able to assist me. I recently purchased a used 2006 Honda CR-V SE. This is actually my second CR-V. I love the car. I am trying to put a front license plate on the vehicle, but have run into a problem. The normal place area on the bumper where the...
  14. 2012 front license plate bracket installation

    Exterior
    We recently bought our 2012 CR-V in another city. When we finally got our license plates, we noticed that there was no bracket on the front. We called the dealership and they mailed us another one. It looks like to me that you have to screw it into the plastic bumper, but we were told by the...
  15. font license plate bracket

    Problems & Issues
    Hi.....new 2012 crv owner. car came with flimsy black plastic front plate holder that is mounted under bumper, top half flops forward- no attachment to bumper on top. is there a nice metal under bumper bracket that fits crvs and no need to screw into front bumper ?? Or am I stuck buying...
  16. 2012 Front License Plate Bracket Removal Question

    DIY Center Discussion
    After removing the front plate bracket from the new CR-V, I noticed that they used self-tapping screws right through the bumper cover. With the S2000, Honda provided little plugs that neatly conceal any hole. With the Fit (if I recall correctly), there are no holes to cover. With the 2012...
  17. 2010 CR-V Chrome Side Step Broken Bracket

    Accessories
    The other day while driving on the parkway I heard a funny "cling-clang-clang" of metal passing underneath my car on the pavement. When I got home I discovered a large piece of the outboard rear side-step bracket fracture off. No bends, jagged edges or damage, just a clean cut chunk perfectly...
  18. Need front license plate bracket

    Exterior
    Howdy folks. I bought my CRV in a state that doesn't use front license plates and recently moved to a state that does. So, I need to acquire a front license plate bracket. I would prefer the honda original. Any suggestions on where to find one? Anybody have one they don't need? Is installation...
  19. Loose Bracket - Gen 1 engine

    Problems & Issues
    Inspecting the engine bay today, I found a loose bracket hanging from the high pressure hose coming out of the steering pump. If I am correct, that bracket should be held at the engine head with one bolt. Can anyone point out what size and kind of bolt should that be? Thanks All
  20. 1999 CRV front grill license plate bracket

    Exterior
    does anyone know where I can get a replacement bracket?
Top