Honda CR-V Owners Club Forums banner


  1. 2003 EX AWD excessive rear toe in

    Problems & Issues
    Greeting all - I have a 2003 EX AWD with just under 100k miles on it. I've had it for about 2 years and recently put new tires on it. During the alignment after tire mounting, the tech told me that he was unable to align the rear wheels to within spec. The closest he could get was: Right...
  2. Rear differential damper on a late 2003

    Problems & Issues
    Just wondering if all the CRV's have the little damper on the rear diff? Anyone know if they all had one? I'm basically trying to track down a slight low speed wobble and replaced pretty much everything on the front end (balljoints, bearings, tie rod ends, links, arm bushes etc) as part of a...
  3. Front control arm bushes

    Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Hello This is my first post on site. My 2004 CRV front lower control arm bushes are on an advisory for the mot. I have checked on youtube how easy it is to replace them (not). Even with a 20ton press and the correct tools it seemed to take the guy an age to replace them. He suggested just...
  4. 1998 Rear Lower Control Arm Bushes

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    G'day I'm looking at replacing my rear lower control arm bushes on my '98 CRV, but there seem to be 2 types, one for pressed arms and one for cast arms...what the hell are the differences? I have googled for knowledge on this without luck and am hoping someone here might enlighten me?
  5. Gen 1 CRV bushes questions? (2001, petrol, UK model)

    Maintenance and Service
    Hi all, I've just bought the above model and enjoying crv ownership so far. The vehicle hasn't been used for a longish period, and therefore is in need of some tlc. I have the Honda fluid for a rear diff change, and will be giving the old girl a normal service (filters, oil etc) this weekend...
  6. Rear Trailing arm bushes

    Maintenance and Service
    Hi Folks, My 99 CRV AWD just failed its 6 monthly check on the rear trailing arm bushes. My local part store can get me them but they want to know if I need 80mm or 85mm. After some forum searching I have found part number 52385-sr3-003 which I believe is 80mm. Can anyone confirm this? At...
  7. replace rear sway bar bushes

    Maintenance and Service
    needing advice the rear sway bar bushes need replacing on my mk1 crv and i would like to to it myself to save cash i have new bushes but they are not split the same as front sway bar ones my question is can i split them to make fitting easier or will i have to remove sway bar thanks chaz in uk
  8. Rear trailing arm bushes...

    Maintenance and Service
    ...Has anyone got any tips on fitting these bushes on my 99 CRV? Failed its MOT on them, so I've ordered a pair up but they look difficult to access without major work and even harder to push in to place without the tool (£200!!) Anyone done it and can give me any tips? I've had a search but...