Honda CR-V Owners Club Forums banner

firewall

  1. How do you install the power cable through the firewall of a gen5 Honda CRV?

    2017 - Present Official Specs, Features, Etc. (Gen
    I am trying to install subwoofer on my gen 5 crv, i don't know how to find the way to install the power cable and this is a location I found, i can use it? or do you have any sugesstion for me? Thank all!
  2. How to pass accessory power and antenna thru firewall, 2013 CR-V

    2012-2016 Official Specs, Features, Etc. (Gen 4)
    I am planning an installation of some radio equipment, and I can only find the one main grommet on the driver side. This seems too narrow for the additional cabling I need to pass thru. Has anyone had success with such installations? I am close to drilling a new hole, but would really prefer...
  3. Front Firewall

    DIY Center Discussion
    Hi Can anyone tell me if there is a hole through the front firewall on a 2011 Mk3 CR-V for a cable. If so where?
  4. Need help with powercable through firewall for an amp (gen 4 - UK 2013 model CR-V)

    DIY Center Discussion
    Hi, I have installed a Subwoofer and an Amplifier into a UK Gen 4 CR-V. I have wired everything up, other than the powercable! Most of the guides on here are for left hand drive cars, this is a right hand drive. I have located where some wires come through a grommet on the firewall on the...
  5. Need access through firewall

    Maintenance and Service
    I am installing Hellas on my '04 and need to run some wires through the firewall. I have looked for a bushing etc that I could use but didn't see anything that wasn't already in use. I really do not want to drill through, so was looking for suggestions. Regards
  6. How to gain access to brake pedal through 2010 CR-V firewall

    Problems & Issues
    We're installing a Readybrute Elite Tow bar on our 2010 CR-V. To hook up the braking system we'll have to drill up through the firewall to access the floor of the passenger compartment and the brake pedal. We were told that, at least on the 2014, the space is very tight and as a result it would...
  7. Access to brake pedal through 2010 CR-V firewall

    2007-2011 Official Specs, Features, Etc. (Gen 3)
    We're installing a Readybrute Elite Tow bar on our 2010 CR-V. To hook up the braking system we'll have to drill up through the firewall to access the floor of the passenger compartment and the brake pedal. We were told that, at least on the 2014, the space is very tight and as a result it would...
  8. 2013 CRV firewall & wiring diagram

    Mobile Electronics
    I've seen a couple threads about installing amps & such in 2012 & 2013 CRV's but I'm not sure I've seen anyone talk about how they're routing power into the cabin. What's the easiest/best route through the firewall? Also, where do I find a 2013 CRV wiring diagram? I mainly need to know which...
  9. Aftermarket Amp/Sub 2009 CR-V LX

    Accessories
    Hey Everyone, I've changed out the Stereo Head Unit to a 7in DVD/Nav/Radio/CD/Ipod/Aux..Ect unit w/ Back up Cam. I can all the wires for it myself. The Only Thing ive been having some issues on is One Cable. I have to Run a Power Wire for my Aftermarket AMP to my battery. I know the batteries...
  10. where to run wire through the firewall in a 2005 CRV LX?

    Do-It-Yourself / Mods
    There are many topics on where to run wire through the firewall, but the problem is that my CRV is a 2005, and while many pictures have already been posted, many of the links are broken because the topic is so old. I'm just trying to run wire from the battery to the amp in the back. I have no...
  11. Where/how to route amp wire through firewall

    Mobile Electronics
    Where and how do you get an amp power wire through the firewall, on a '03 CR-V EX? Is there a factory installed plug that can be removed? If so, where can i locate it? Or does one have to drill a new hole - if so, where do you recommend? I'm putting in an amp and sub-woofer. THanks, bob
  12. 1999 CR-V -- Drill firewall to install subwoofer amplifier

    Mobile Electronics
    Hi, I am new to this forum and glad you are all here! I just bought a 1999 CR-V and I am getting ready to install a subwoofer and amp. I need to connect the amp power to the battery, but I don't see any good spots for getting through the firewall. Are there any good spots, or do I have to...
  13. Wiring through bulkhead (firewall)

    Mobile Electronics
    I need to find a path through the bulkhead of my 2006 CR-V for two wires (fitting DRL module). What's the best way to do this without having to drill a hole specially?
  14. Drilling hole in firewall

    Interior
    Has anyone ever had to drill a hole in the firewall? I want to put in an interior car heater (110v). Is there a "preferred" spot?
Top