fitment

I have white 2016 EXL with 17". from what I have found these civic wheels 17x7 45offset 5on4.5 have same exact measurements as the wheels I have but yet none of the comparability charts on any website says they will work. Ive been looking at aftermarket rims but since I just purchased this with...

quick question, I believe they will fit, but want to double check. Have a 2014 CR-V LX, found some 2017 honda accord rims that are 7.5x17e55 rims. Will they fit? the tire fitment charts say the inner edge of the rim will be about 17mm closer to the struts. any input would be helpful. thanks

Hi, This is a long shot but I'll ask anyways. Lease was up on my 2016 CRV and we got a new 2018,trying to install my snow tires which were on my 16 and they won't fit the 18 due to the callipers being bigger. Found a set of 2003 OEM Acura MDX 17" alloys with new snow tires for a killer deal,my...

First post to the forum!! First time crv owner. Just picked up a 08 Ex-L with nav and all the goodies. The rear hatch has a pretty good size crease in it. I’ve located plenty of non navigation rear hatches without the rear camera hole. My question is, is there some sort of “indent” on the rear...

Hi all, it's time to beat a dead horse again. No seriously I have a few questions regarding wheel and tire size. It's time to put some new tires on the cr-v and I need options. I have a 2003 Honda cr-v with 15" stock rims and 205/70/15 tires. I want to put an all terrain tire on it but I am...

Hi there, Im looking to get new wheels and re use my winter tires i currently have. The winter tires are 235/65/18 just as the stock CR-V 18" wheel. So... Since the stock wheels are 18x7.5 +45 i was wondering if i could get 18x8 +45 wheels with the stock tire size. Will the wider wheels rub...

Hey guys, new to the forum :). I'm preparing to winterize our 2017 CR-V for winter and found a set of rims with similar size to the CR-V's. Would 17x7 + 50 offset fit the CR-V and clear the brakes? I would use 235/65R17 tire size to keep the speedo accurate. Any help would be greatly...

I used their website bulb fitment filter to order my reverse bulb and log lamp to change them to LED. Both are going back since the bulb for the reverse is incorrect and the fog lamp does not fit the hole. I did a direct order from their website thinking it is accurate. Their customer service...

Hello fellow CRV owners, first post new to forum.. looking for a solid answer. If this has been answered please direct to thread. I own a 1998 crv AT 4wd. The transmission is toast, wont move, pull the dipstick out and there are chunks of things on the dipstick. My question, which years...

I was wondering if I will have any rubbing issues with this size tire with stock height on a 2011. I am looking to go with the H&R springs and if so will I need to adjust tire size to not have rubbing? Thank you in advance.

Just picked up a 2014 CRV for my wife. It came with the stock 16 inch steel wheels. She would like a nicer set of aluminium rims on it. Is there any other stock Honda 16 inch rim that would fit it?

I want to put 2005 Acura MDX wheels/tires on my 2009 CR-V LX. Lug Patterns are the same, 114.3 X 5, both are 17" rims,I believe that Honda is 6.5" wide, the Acura may be 7" wide. Wheel Offsets are within 5 mm, I believe Honda is +50mm, Acura +45mm, tires on rims now are Honda: 225 65 r17: and...

I am attempting to decide between a Thule Force M and Force L cargo box and was really hoping someone could tell me from first hand experience which would be the better fit. Considering the negligible price difference I would like to go with the larger box, but after installing the factory...

Hey guys just got a 1998 crv wanting to lower it and put some wheel. Saw a set of wheels which are cragar soft 8 i think. But the offset is 0......will this fit my crv because ive seen some crv have those set of wheels. Sent from my SM-N910W8 using Tapatalk

Hi all, Just picked up an OEM dog guard for my wifes 2011 CRV and didn't realise you have to drill holes in the rear pillar trims to fit the thing. When supplied new it comes with a template for drilling the two holes on each side in the correct place which I don't have. A long shot I know but...

Hi all - I'm curious to know if anyone has tried to fit 4th gen wheels on to a 3rd gen CR-V. There are very few 3rd gen factory alloys out there but the 4th gen ones are all over the place. The specs seem to be the same (4x115 - or 114.3 depending on where you look, 50mm offset, 17x6.5) but...

How much clearance is there on stock 4th gen (ours is a 2012) EX-L 2WD? I'm interested in knowing if 255/50R19s will fit w/o requiring any mods, using ET55 wheels. Using a calculator, this results in the following: Suspension clearance: 20 mm (0.8'') closer to suspension/brakes components...

Hi guys, Thought I'd ask you experts to see if anyone has run this combo of wheel size So standard gen 2 is 16 x 7 +55 offset tyre size : 215 65 16 I'm hinting about putting on some 16 x 6.5 + 50 offset tyre size 205 65 16 Now does anyone know if I will require spacers as there is a 5mm...

I searched and actually found a thread with the exact question I'm going to ask: http://www.crvownersclub.com/forums/23-tires-wheels-suspensions/12831-can-i-use-98-accord-wheels-my-04-crv-seeking-snow-tire-reccomendations.html ...but nobody answered. :( I've got a deal on some relatively new...

Hello, Someone locally has a set of 17" rims from an Odyssey for a very reasonable price (to me anyway). I'd like to replace the factory steel rims on my '09 and see conflicting info on other sites as to if they will fit or not. So, i figured I'd ask here for anyone with knowledge of these rims...