Honda CR-V Owners Club Forums banner

fitting

  1. Front and Rear bumper garnish replacement

    2017 - Present Official Specs, Features, Etc. (Gen
    Does anybody have any instructions for replacing the front and rear bumper garnish? We've got the replacement garnishes but are unsure how to remove the current ones and fit the new ones! It's a 2016 model. We have been told it's an easy job but thought it best to check before we started...
  2. 1998 Motor Mount Upper Drivers Side not fitting

    Problems & Issues
    Hello, I've had my CR-V for about 3 years now I think, and the previous owner saw me coming... among the many issues I've found the upper drivers side motor mount was removed, along with the metal bracket that attached the mount to the lower bracket, and instead a plate was used to bridge the...
  3. 2006 CRV towbar fitting question

    Racks, Hitches and Towing
    Hi, I have just bought the 2006 2.0ltr Petrol CRV (older shape with wheel on the back) - I am based in the UK. It does not have a towbar and I want to get one fitted. In the UK there are a few type of towbar options (standard ball, swan neck fixed and swan neck detachable). I have been keping...
  4. Fitting a radio to a 1999 CRV

    1999-2001 Official Specs, Features, Etc. (Gen 1.5)
    Hi all My mate has given me the radio/CD player from his old civic same year as my CRv but the wiring plug at the back look nothing like mine the radio is a Pioneer Model no 39101-S9A-E210-M1 Can anyone tell were to get an adapter for it in the UK Thanks :Help:
  5. Coolant leak through Transmission cooler fitting

    Problems & Issues
    Hey, I was doing some work on my 99 crv today because I had a weird issue when It would warm up I would get this weird jump/stutter in first gear when accelerating from a start. I saw that there was tranny fluid dripping from the fitting that comes out from the bottom of the rad, I tried to...
  6. Fitting aftermarket Xenon kit

    2007-2011 Official Specs, Features, Etc. (Gen 3)
    I have european edition of CR-V year 2010 with projector headlight. The bulb is H1. I bought a Xenon kit on the web and found out two problems. One is "flicking" of the lights when starting up the car. My lights turn on automaticaly when before I start the engine (when the key is in the middle...
  7. 2004 CR-V aftermarket double DIN radio trim. What is the best fitting kit available?

    Interior
    I'm ready to replace my OEM tape deck/CD player unit, but am having trouble locating a good trim kit. The ones I found on Amazon like this one and this one, are said to require cutting, trimming and grinding to fit in 2nd gen CRV's. Does anyone make a quality double DIN mount kit that...
  8. 2006 transmission cooler line fitting leaking at radiator

    Under The Hood / Performance
    I recently had to replace the radiator on my 06. The factory radiator had one fitting that was threaded onto the cooler line with female thread and a second that appeared to be soldered in place. The new radiator had two male fittings-I went to a radiator shop and was given a female fitting with...
  9. Help: CRV Sport 2000 model - fitting side steps

    1999-2001 Official Specs, Features, Etc. (Gen 1.5)
    Hi Everyone, I'm new to Honda, just purchased a silver 2000 CRV Sport. I just received some side steps I purchased off a wrecked Honda, but I'm not sure how to mount these side steps. They came with 3 brackets on each side, just not sure if they are to go into factor holes under the body, or...
  10. Advice on fitting an Eonon after market stereo

    Accessories
    Hello all hope all is well. I'm after some advice from those of you in the know. I have a mark 2 (2006) Honda CRV with the factory fitted double din Honda sat nav system. I'm looking at buying an after market Eonon system with built in sat nav, DVD etc. does anyone know which model will fit in...
  11. Honda crv 2003 with alpine bb712pc nav unit - fitting bluetooth h/free

    Mobile Electronics
    I am about to fit a Bluetooth Hands Free Unit to the CRV. I have located the two cables that will provide me with 'constant' and 'accessories' (ignition on) 12v power sources and an Earth/Ground cable. However, the Bluetooth unit requires a fourth cable to be hooked up to the Honda Unit's...
  12. Fitting a powered tailgate on a 2014 CRV

    Do-It-Yourself / Mods
    Tomorrow morning I have to visit the bodyshop where my poorly CRV is, it needs a new tailgate after losing an argument with a roof hip/ridge tile I was wondering if any of you guys knew how these things work, will they simply order a complete new door in the right colour and simply fit it or...
  13. Retro Fitting USB lead to In-car Radio on 2007 CR-V

    Do-It-Yourself / Mods
    Hi there Does anyone know if you can retro fit a usb lead to the CR-V in-car radio? The owners manual shows a usb lead for using ipod or mp3 player but my model 2007 CR-V ES I-CDTI (NOT with statnav) doesn't have the usb lead. I don't want to try taking the radio out if I can't install a usb...
  14. Have I spotted a leaking AC Fitting? Advice needed.

    Problems & Issues
    So, I was inspecting the engine bay of my CR-V the day before a long road trip, and noticed something I would consider abnormal: a suspicious looking stain around the AC high side tube. It looks like it has leaked AC oil out around the fitting, and possibly freon. I don't know what to make of...
  15. Fitting original side steps 2006

    Exterior
    Hi all im looking to fit some used but good original side steps , think ive got most of the fittings but could do with the instructions or some help diagram or similar if poss please
  16. Fitting aftermarket drl

    Do-It-Yourself / Mods
    has anyone found a good aftermarket drl kit that suits a 2008 CRV and fits well into the front bumper or similar panels??(UK EX model)
  17. fitting towbar 1996 import

    Do-It-Yourself / Mods
    Hi has anyone fitted a towbar to a 1996 import crv, if so any problems
  18. question: different set of wheel for fitting

    Tires, Wheels and Suspensions
    Hi, I got a set of rims. it's offset 38 for my honda crv 1998 model. will it be fine? I'm putting on the stock tire 205/70/15. Another question is that.. 3 rims are offset 38 and i found out one is offset 40. Will I have a problem if I will fit it on my V? What should I do to fit it? Thank you.
  19. Fitting an interesting engine - will an Integra Type R fit? Performance ideas?

    CR-V Owners in Europe
    Look, this is a bit of a day-dream, but I have a 2000 CRV and saw a Integra Type R DC2 engine up for sale (with ancilliaries) and thought... Now mine is an auto (of course that would probably defeat any power gain) and I guess for what it gains in BHP it loses in torque, but I'm just curious...
  20. 235/50/18 or 225/50/18 04crv fitting

    Tires, Wheels and Suspensions
    I am thinking about buying a set of wheels off of tirerack and they are 18x7.5 45 offset. I am not sure if I should get 235/50s or 225/50s. I have seen pictures of crvs with 235s and it fills up the fender nicely. I have no plans on lowering the car or anything like that. I might put some side...
Top