Honda CR-V Owners Club Forums banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

gasket

  1. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Started to smell exhaust inside the car last week and since the exhaust is 18 years old I tried to convince myself that it really is best left well alone... This what the recirculation button is for right? Who cares if it steams up a little? But wait, we are driving 4 hours to a cabin next...
  2. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Hello all, ran into a issue while changing my plugs today. Cylinder 3 has oil all over it, and the coil is covered in oil. I know that mean I need a new valve cover gasket. Any how, I picked up the gasket, and now need help deciding on putting the right RTV sealant on. I picked up permatex ultra...
  3. Gen 3: 2007-2011 (UK 2008-2012) CR-V
    Hello, my 2008 honda crv EXL, 106k miles, is producing a tapping sound from the engine especially when in drive mode. My mechanic diagnosed it, checked the engine oil, and is suggesting that we first try with the following: 1. Replace Valve cover gasket 2. Replace 4 iridium spark plugs. I don't...
  4. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Just wondered if anyone else has had this issue? I was cleaning over the weekend and noticed that the gasket around one of the rear quarter windows has pulled out. There's nothing that I would have done to have caused this. It happened on its own. I already made an appointment with my...
  5. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    I have discovered a coolant leak where the water outlet (19315-PR4-A01) bolts to the head on my 01 CRV. I am trying to find out if it gets a gasket or if I need to use gasket maker before take it off so I can have what I need on hand. Honda's parts diagrams do not show a gasket so I'm assuming...
  6. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    posted in problems and issues forum...
  7. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    I am having an issue with my 98 CR-V and its been tough to pinpoint what it may actually be. It appears that I am leaking oil and engine coolant from somewhere, its been nearly impossible to pinpoint the leak from looking under the hood so it doesn't appear to be any of the largely exposed...
  8. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    After a week or two of temps in the high 90's, I noticed that the rubber gasket around the top of the driver's window was sagging. I took it to the dealer thinking it could be popped (or at least glued) back into place. Apparently not, as they had to order a new gasket that will require them...
  9. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    I need to put in a new rear hatch gasket on my 06. BUT, the lifts that hold up the rear hatch window are blocking me from putting a new gasket in. How do I remove those guys to get them out of my way???
  10. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    A while back in a welcome post I mentioned finding small oil deposits around the base of the valve cover after the fist oil change. I cleaned it off and noticed oil had returned by the second service visit to the dealership. They concurred it could be leaking, cleaned it off and tightened the...
  11. Gen 3: 2007-2011 (UK 2008-2012) CR-V
    Hi, I live in the Seattle area. I own a 2008 Honda CRV. The dealer during regular oil change recommended that I do the following: 1. Reseal oil pressure switch - $220 2. VTEC Gasket replace - $200 3. Front Crankshaft Seal replace - $350 I want to know for each of the above items: 1. Which are...
  12. Trading Post
    Looking to sell my port and polished intake runners and thermal gasket. Looking for 150 shipped anywhere in the US
  13. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    My crv has been leak oil from engine crankcase pan gasket. So I renewed rubber gasket. Although it was still leaked from near gear box side. I doubt oil was from main crank shaft seal. If leakage from there renewal of this seal may be difficult. What should I do?
  14. Performance Modifications
    Getting ready to set the camshafts into the new head on my CRV. It specifies using HondaBond sealant on the cam holders, but I don't have HondaBond....I have Permatex high temp RTV sealant....is this ok to use?
  15. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    My 98 has a leaky oil pan gasket and I'm wondering if someone on here can tell me if I can replace it without removing the engine? I bought a shop manual on eBay for $40 and it's been worth every penny as I've replaced the timing belt, water pump, all cv boots have been replaced, front outer cv...
  16. Performance Modifications
    I had my valves adjusted Monday as well as valve cover gasket replaced. Mechanics didn't say anything about the engine leaking. By Tuesday I was smelling hot chemical during my evening drive, when idle at stoplights. Thought it might have been the fixative they used on the VCG or maybe a dribble...
  17. Gen 3: 2007-2011 (UK 2008-2012) CR-V
    I apologize for not having pictures all the way through, but I do have pictures documenting the most difficult parts Disclaimer: I am not responsible for any damage to your vehicle, yourself, or anything else. I assume no responsibility for your actions or improper repair procedures, whether...
  18. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    At the end of August 2012 the flange on the end of the B-pipe rusted off, and the muffler swung down, though fortunately doesn't touch the ground and didn't break the bottom of the bumper. It's sorta odd that the B-pipe flange fails before the pipe rusts through. At first I was going to go get...
  19. Shopping & Test Driving
    1997 CR-V with about 180k miles recently overheated when thermostat croaked. Replaced thermostat, but coolant continued to drip from engine. Auto shop said the head gasket needs to be replaced ... to the tune of about $1,800. Rather put that $$ into a new (used, actually ... but new to me) car...
  20. Performance Modifications
    I have heard people say do not use Felpro gaskets for head, and I have heard people say they used them with no problem. What do those of you that have replaced your head gaskets have to say? I purchased my kit from Autozone and it includes Felpro multi-layer steel head gasket. Thanks...
Top