Honda CR-V Owners Club Forums banner


  1. Brush guard or bull bar

    New to the forum here. I have a 2000 carb ex and I’m looking for a good brush guard or bull bar. Any one know where the best place to get one is?
  2. Wheelhouse, splash guard question

    Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I apologise 6 in advance if I'm posting in the wrong place. Here's my question... I have a 2018 EX that had wind damage to the fenders back in March. After the repair in which the shop said they had to basically take my vehicle apart to match paint and clearcoat everything, I never really...
  3. Underside tin splash guard self destructs...again

    Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Has anyone else had issues with the tin splash shield that conceals the underside of the engine crumple and start to break off after driving through puddles of water? This is the second time I've had this issue. The first time it broke I figured I hit a spot of water on the road and it tore...
  4. 2017 - 2018 Splash Guard.

    Do you like the accessory Splash Guards?
  5. Scotch guard seats on your own

    Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Wondering if anyone has scotch guard their crv seats on their own? Any tips? Regrets? Product suggestions? I have the white diamond exterior with ivory seats and am looking to protect them while I can from a 1.5 and almost 4yo boys.
  6. New splash guard screw seems stripped?

    Hello everyone! Wife got a new 2018 CRV EX about a month ago and I finally got around to installing the splash guards. Everything seems to have gone fine, except one screw does not get as tight as the rest. it's the top screw of the front driver's side guard. This is the one you puncture...
  7. Door Edge Guard

    Gen 5: 2017-2021 (UK 2018-2022) CR-V
    anyone put a door edge guard? I just want to protect the door edge if it hits the other car when parked by passengers not that careful.
  8. Bumper Guard... Meh.

    Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I purchased the bumper guard for my CR-V, and I'm not too impressed. On my last car (an '05 Passat Wagon), I got this nice aftermarket guard that covered most of the bumper, covered the lip on the edge, and sat flat on the surface. The CR-V guard? It only covers the last inch, and instead of...
  9. 303 stain guard spray

    Maintenance and Service
    has anyone used 303 stain guard spray on the interior of their car? any input would be appreciated.
  10. CRV-II Rear brake splash guard replacement

    Problems & Issues
    Upon rear disc replacement i have found that the rear brake splash guards on our CRV II have rusted away. Have bought new ones from honda and all new park brake shoes etc. But can anyone help regarding removal of the old. I cant see how to replace without dismantling half of the car :( Are...
  11. Door Edge Guard Options other than Honda?

    Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Anyone know of any other door edge guard options that would look nice and be color matched? Jeremy with College Hills Honda Parts talked me out of ordering them. When I looked at the installation instructions, I can see why. Not really wanting to cut the seam sealant on the doors and paint...
  12. 05 Cr-V Wheel Well Splash Guard

    Miscellaneous / General CR-V Discussions
    Really off question for the 05 owners. Should there be a splash guard by the steering rack? I noticed while washing my car today that there is literally an open area where the steering rack connects to the control rod. Upon looking further into the well, I see some mounting points that may have...
  13. Adding dog guard

    Gen 4: 2012-2016 (UK 2012-2017) CR-V
    As the owner of two Golden Retrievers, and knowing that the younger of two was very good at getting past the load barrier on my 05 Pilot, one decision I needed to make was get a good dog barrier. I found it in who manufacture in England but warehouse product in the US. I just...
  14. New contour bar (bumper guard) for my 12' CRV

    Image & Video Gallery
    I started out with a 2012 LX but wanted a little bit more flash. I started with getting the Touring package rims, added side moulding, had custom seat covers made, and finally got a bumper guard or as they call it, a contour bar. Here are a few pics. Let me know what you guys think. The seat...

    First off, if this question has been already asked, sorry guys... As you can infer from the title, I'm thinking about installing one or the other to my 2003 V. Does anyone have an opinion or pros/cons? I'm looking for something to offer some low-speed protection (the internet says a majority...
  16. Anti theft side miiror guard

    Miscellaneous / General CR-V Discussions
    Hi Guys Been reading a lot about side mirror's being vandalized or stolen. I had the same fate couple of weeks back when after shopping in a Houston Mall returned to the parking lot to find both the side mirrors of my Honda CRV 2015 missing. After a lot of internet browsing found a company...
  17. OEM door edge guard for 2013 CR-V

    Hello! I'm planning to get OEM door edge guards installed on my 2013 CR-V from the dealer, but before doing that I would like to see how they look already installed. I was wondering if anyone who has installed OEM door edge guards on their CR-V can post some pictures. I'd really appreciate your...
  18. OEM Dog Guard Fitment

    Hi all, Just picked up an OEM dog guard for my wifes 2011 CRV and didn't realise you have to drill holes in the rear pillar trims to fit the thing. When supplied new it comes with a template for drilling the two holes on each side in the correct place which I don't have. A long shot I know but...
  19. Rear Bumper Guard vs. Appliqué

    Hi I wanted to get something to protect the rear bumper from scratches when i throw stuff in the back. I've seen stainless steel guards and the official Honda Rear Bumper Appliqué. Anyone have experience with either? Recommend one over the other?
  20. YR2 Mud Flaps | Slash Guard Set $18 for 2012+ CRV [OEM Copy 08P00-T0A-100 alternate]

    Seller: Transit time: 2.5Weeks Order total: $18.60 (vs. $104 + NYC [email protected] of Manhattan) Fitment: Surprisingly fit exactly like oem, screws and washers were included (plenty of them more than you need for install) Notes: I noticed that the entire side of...