Search Results for ‘guards’

Yesterday I was running my 2016 CRV thru some intermittent rain with the windows partially open (my preference, fresh air vs. the AC) and water drops were working their way inside. Note: I also frequently park with the windows slightly open. In the past I've been happy with the WeatherTech...

Today I was running my CRV thru some intermittent rain; with the windows partially open (my preference, fresh air vs. the AC) water drips were working their way inside. Of note, I also frequently park (summertime weather) with the windows slightly ajar. In the past I've been happy with the...

I just bought my first Honda CRV (and first car!) yesterday. Funnily enough we were on our way to buy a Nissan Rogue and stopped by a Honda dealership to test drive just incase. 5 hours later we drove off with our EX-L. Now that I've got it home, I'm already looking into getting all-weather...

Are the Door Edge Guards that are color matched worth getting from the dealer?

Our brand new 2019 CRV Touring was sold to us with dealer installed door edge guards and I want them off. The salesman told us the guards are glued on and a lot of time and labor is required to take the off. Looking for guidance on how to remove the guards without damaging the doors and...

when I negotiated my price, I could not get mud flaps included. I was going to buy them from one of the on line seller, the Honda OEM are $72 on Amazon Prime. Are there any other options. Anyone have the OEM mud shields, do you think they look better on the car?

Does anyone have a vendor that sells rain guards for the 2018 model. I have used weathertech for all of my vehicles but they do not make them for the 2018. I like the weathertech and would like to stay with them. I sent them and email and here is the response. Maybe some other 2018 owners...

Custom made tail light guards for 97-01 Honda CRV. The original brand of guards are discontinued and now it seems they're in high demand, so I figured I'd offer a different option. The price is $125 a set shipped to lower 48 US states or $100 picked up in the Portland,Oregon area. PayPal...

Hello, I installed my Honda OEM Splash Guards today. I have a question on the two front splash guards upper outer screws. Are those supposed to get tight, or only hand tight? It seems they keep never-ending screwing in without any tension. I definitely do not want to strip the threads...

Can they damage the window gasket or window motor? I also dislike stick on rain guards for outside installation because of the 3M double sided tape. Do you have any experience with the in channel ones and is it OK with the CRV?

Are splash guards worth it on the '17? There's no painted area they would protect.

I bought a set of splash guards and it turns out the rear ones do not fit the Sport bumper I have. They are made to fit only the stock bumper (which I verified on my old bumper). So selling the rear set only - $30. They come with the black screws needed to install them.

I would be most grateful if someone could help me find a set of front splash guards for an 2005-06 CRV (08P08-S9A-100A, or 08P08-S9A-300A in Canada), which are 'discontinued' with Honda. I know that the ones for the 2002-04 models (same part number minus the 'A' at the end) don't fit; and of...

Hi folks, new 2017 CR-V EX-L owner here. Problem: I live in the city where some people are not so nice about creasing your bumper. I'm looking to see if anyone knows of a bumper guard that doesn't affect or inhibit the sensors from working or causing a malfunction? Thanks

I just received my set of splash guards and noticed the rear one will not fit my sport bumper. Did some search but can't find anything. Does anyone know if splash guards for rear sport bumper even exist?

Mom wants splash guards. Had seen lots of people say the factory ones are an easy install. couple reviews i've seen, though, say they think the guards are smallish and may not be effective. anyone using anything other than factory guards for better protection?

Anyone have a bull bar or bumper/brush guards yet? I'm interested in a Vanguard Bull Bar for my EX-L but I'm worried it might interfere with the sensing and radar technology that's located in the front of the vehicle...

I ordered splash guards for my very new EX-L and will put them on myself. Is there anything I should know about the best way to add them? The instructions make it seem simple, but I'm wondering about the best way to do it and not have to worry about the new holes I'll screw into the body...

After negotiating a good price, it took my dealer a week to locate the color combination I wanted and get it transported. Unfortunately, it has the door edge guards which I hate. How do I get them off? If it's a hassle l'll take it back to the dealer.

Bought 2 pairs of the plain off the shelf black rubber door edge guards from Autozone but I was unable to install them because the door lips on the 4th generation are too thick due to what I think is bead of seam caulk on the inside of the lip. The size of the opening of the guard was not wide...