Honda CR-V Owners Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 7 Results
  1. Do-It-Yourself / Mods
    Hi all. Ireland here on second crv. First was a 2000 and was recently forced to change to a 2006 as insurance companies here seem to be allowed to write laws and refuse to insure cars over 15 :) I got some OEM side steps (shop sent four brackets and 2 bolts! ) Was wondering if anyone had...
  2. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    Crv 16. Noticed these holes on inner bottom of hatch. Anyone knows what they re there for ?
  3. Miscellaneous / General CR-V Discussions
    hello people; 13V here and I noticed opening the hood that crap gathers near both hinges. I poked around and found enough crap that the DH got clogged to stop the draining. I believe my sister Suburu has the same location. Are these drain holes and are there more? IBBY
  4. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    Doing the T-belt on Saturday. I heard that there are holes in the Bearing Caps that run down through the Cams when the Engine is set at TDC. The idea is to put a Drift or Drill Bit in there to hold the Cam's position. It helps hold everything true as you swap the belt. Is this true?
  5. Accessories
    I'm about to embark on adding the backup sensors and the part where you drill big old holes in the bumper had me worrying a bit. The sensors require 24 and 26mm holes. I bought a set of step drills on eBay thinking they'd work great. Only to have a duh moment when I realized the surfaces are...
1-5 of 7 Results
Top