Honda CR-V Owners Club Forums banner


  1. JDM transmission/TCC swap

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    Ok guys I just bought a 2000 crv lx. I knew it had transmission problems and it was not functional when I got it. Did some research and found out the torque converter clutch (TCC) was almost definitely the issue and that when the TCC goes it releases a lot of metal shavings into the aromatic...
  2. newbie engine removal/ replace with JdM

    Problems & Issues
    About to remove the motor on a 2000 crv automatic, spent the day disconnecting everything, in searching the internet, there is no real concensious about with/ without trans or to go up and over. or under and out, I am going to remove both the trans and engine at once, but haven't decided up or...
  3. JDM CRV - is there anyone I can talk to about them ? 2.0 or 2.4 Vtec

    Gen 2: 2002-2006 (UK 2002-2007) CR-V
    I'm new to the forum, looking to import a JDM CRV as a Canadian daily driver and want to talk to someone who is familiar with these cars. I have owned a bunch of a few JDM cars in the past. Biggest questions are: -Common issues / possibly recalls (I know it won't help it being a JDM car in...
  4. 97-01 First Gen JDM Fender Mirror Installation

    Yet another install guide for the first gen CR-V JDM parts that aren’t documented that I know of. Had figured out the JDM Rear Mirror a week ago, now I’m going to show you guys how to with the JDM Fender Mirror. Ordered from Malaysia for $110 shipped and should be arriving this week. Of all the...
  5. 97-01 First Gen JDM Rear Parking Mirror Installation

    I was just able to purchase a JDM Rear Parking Mirror on eBay from a seller in Malaysia for $100 shipped. For the last four years, I’ve sourced out some rare (or becoming rare) for my 2001 CRV EX. From Clear Euro Markers, Red Hazard Button, Rear Spoiler, Tail Light Guards, Passenger Armrest, and...
  6. JDM K20A Motor in my 2002 CRV LX: Anyone else done this swap?

    Problems & Issues
    Bought a K20A from JDMEngine Depot... says it will work for replacing the k24A Got it all swapped and having issues with it running rich and idling from 1.3k to 2k rpms after warmup. When not warmed up does about 1.3k rpms. For those who have done this in their Gen 2 CRV, noticed on their...
  7. JDM Engine?

    Performance Modifications
    Good morning guys and girls. New member to the forum. My wife has been driving a 06 for 4 years or so. We just bought a van for more room for activities, so the CRV is now my daily driver. Its pushing 230k miles and the timing belt service is overdue. My question is, can you install a JDM...
  8. issues with new jdm awd transmission

    Problems & Issues
    Installed a awd Jdm trans I picked up off of offer up in my 1998. The seller seemed light and the transmission was still on the pellet it was shipped on from the jdm place. Installed it and drove it for a half a day and then the cel came on for shift solenoid B. bout a new one, installed it and...
  9. 2004 CRV P0171 After JDM Swap

    Problems & Issues
    Hi, I just had a JDM swap done on my car and am getting a P0171 code. I put a new 02 sensor on, cleared the codes, and it came back. I went through looking for loose hoses, cleared the codes, it came back. The intake gasket doesn't appear to be leaking, I did the 'spray test.' The fuel rail...
  10. Gen 1.5 RD 1 JDM Fender Mirror?

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    Hi Everyone, I'm looking for a left hand fender mirror for a Gen 1.5 JDM CRV in the UK? (RD 1) Colour not important as I can spray it. Can anyone help or PM me? Cheers!
  11. Does anyone have JDM number plates on their CR-V??

    My friend with a JDM 1999 Subaru Forester got some JDM plates for his car and they look awesome :) Since then I've seen them around on other JDM model cars and I am envious haha. Does anyone have JDM plates on their JDM CR-Vs?? I've checked the VIN and mine definitely is JDM :)
  12. JDM B20 w/ P8R Head/Intake Manifold

    Do-It-Yourself / Mods
    Hello guys I have a (First Gen)1999 Honda CRV AWD Automatic, and I currently am waiting for a JDM B20 from HMotors. The sales rep told me I would have to change my intake manifold from my old motor and put it on the JDM motor, he said the JDM motors intake manifold was a P8R, along with the head...
  13. 1999 Honda CRV JDM engine change issues

    Problems & Issues
    Hi, everyone. I'm new here so just wanted to say Hi. Well the issue I'm having is I changed my engine, the usual valve issue, misfire, with a JDM one. Swapped the intake and oil pump as well. But now I just realized my driver side axle is rubbing against the frame. The bearing and bracket...
  14. Oil burning - 99 with JDM engine

    Problems & Issues
    My daughter's 99 CR-V (with automatic transmission) had a B20b (or perhaps B20z - not sure) JDM engine installed about 40,000 miles ago. The engine has now developed significant oil consumption, probably around 1qt/300 miles. Other than a small drip from the valve cover, there is no obvious leak...
  15. 1996 CRV JDM import timing belt question

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    Hi all, I have a 1996 CRV JDM import that I am getting ready to change the timing belt on. So far all work I have done to the vehicle has been nearly identical to the US 1997-1999 CRVs. The Factory service manual is great for torque values but it annoyingly tells me the thread/pitch of every...
  16. Jdm auto awd trans compatible in usdm cr-v?

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    I bought a 2001 CR-V with a busted trans. I want to throw in a replacement trans, but I'm actually having a hard time finding a USDM trans locally. I work in the automotive industry and we have access to a few local companies that sell JDM transmissions for a wholesale price. I've heard...
  17. Rear Jdm TailGate mirror help

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    My mirror came in from Malaysia (can't just send it back) it was well packed but who knows what the hell USPS did with it. The glass is absolutely shattered. Does anyone know if/where i can find replacement glass for this? I know the mirror itself is convex does anyone know if this is something...
  18. 2012-2014 CR-V JDM Imported Front End Parts Bumper Headlights Foglighgs Skid Plate

    Trading Post
    FS: 2012-2014 CR-V JDM Front End Parts Bumper Headlights Foglighgs Skid Plate Hey gang, I sold my CR-V a few weeks ago and have some goods brand new in the box have never seen the light of day. Looking to clear out the entire lot $1,000 Plus Shipping (for it all) willing to break up the lot of...
  19. 1996 CRV JDM CEL and ABS codes

    Gen 1: 1996-2001 (UK 1995-2001) CR-V
    Hello, this is my first post but Ive been a forum lurker for some time. I finally have a problem I cant seem to figure out. I have a JDM model 1996 Honda CRV complete with the useless nav system and everything. I purchased her about 6 months ago. first thing I did was change the oil...
  20. 12-14 JDM Style Front Lower Conversion

    Do-It-Yourself / Mods
    Hi, was thinking about doing one of these conversions. Has anyone done one yet? Hows is the quality, fit, finish, ect? Joe