Honda CR-V Owners Club Forums banner

lowering

  1. Tires, Wheels, & Suspensions
    Hey guys and gals, I’m looking to lower my 2012 CR-V on coils and I found Godspeed MonoSS coils. I was wondering if anyone has used them and if so what their experience was? How’s the bump harshness, how does it affect handling, and are they worth the money? Thanks!
  2. Tires, Wheels, & Suspensions
    Hello, posting b/c cant find any useful/recent info on lowering a gen2 crv. My suspension is blown all the way around, with my front right being siezed, i need somthing 'round 200 to 500 in price, ive got basically a brand new front end so im reluctant on changing out any parts there. I would...
  3. Tires, Wheels, & Suspensions
    New 18' Touring owner here. I was reading that the newest CR-V chassis is shared with the Civic- are there any available springs for our cars yet?
  4. Tires, Wheels, & Suspensions
    Anyone tricking out the crv with mods such as lowering and straight piping?
  5. Tires, Wheels, & Suspensions
    Hi newbie here, I'm thinking of lowering my 3rd gen and I've been through some stores that sells them but it's going to cost me $400 plus $160 to put them on, is this how much they really cost or I can get them cheaper somewhere else. Thanks
  6. Tires, Wheels, & Suspensions
    I've searched but can't find anything specific (maybe I'm just bad at searching)... Does anyone make a lowering spring for a 4th gen CRV? If not, do we have any lowering options whatsoever (aside from ghetto cutting the springs)? Don't care about off-road as I have a truck for that. I just...
  7. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    hello all! So I can't seem to find anything other than h&r springs online. Wasn't too impressed by them years ago when I had a gen2 integra. Would like something a little stiffer than stock and dropped probably 2 inches. Any suggestions? Not going to be replacing rims. Will I run into a major...
  8. Tires, Wheels, & Suspensions
    I know this has probably been discussed on here before but I'm too lazy to look it up and honestly, I'd rather have a fresh thread about it anyways. I am the owner of a 3rd gen CRV and I am going to be upgrading the suspension on it. I have been told to do lowering springs by some people, while...
  9. Tires, Wheels, & Suspensions
    Just wanting to post 4th gen. Crv on H&R lowering springs finally got installed. Mine is AWD I did notice comparing with FWD their seems to be more of a even drop front and rear with my AWD front a little higher than the rear maybe this has something to do with the AWD having a rear differential...
  10. Tires, Wheels, & Suspensions
    Hello, i am wondering if ebay honda adjustable lowering suspencion springs can fit my 99 crv. http://www.ebay.com/itm/HONDA-ACURA-ADJUSTABLE-1-4-LOWERING-SUSPENSION-BLUE-COILOVER-COIL-SPRINGS-/150718718686?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AHonda&hash=item23178922de&vxp=mtr
  11. Tires, Wheels, & Suspensions
    Hi, like in my other thread, I'm looking for the first gen CR-V. I found one that seems very nice and I plan on lowering it a bit (I know that some people find it stupid or else, but that's what I want to do) Although I don't want to slam it, I still want to be able to use in in winter (I live...
  12. Tires, Wheels, & Suspensions
    Im looking at doing my suspension up, and a skunk coilover for 250$ seems reasonable. I would probably drop it 2 inches maybe 3. If I could refute the 250$ in mpg saving I will jump on it. I drive highway a good amount and I know that is where it comes into play mostly. Gas being around 3.79...
  13. Tires, Wheels, & Suspensions
    While searching for lowering springs, I found that H&R's website application guide listed part number 51822 as compatible with the 2102 CR-V. I noticed that it is also the same part number for 2007-2011 CR-V's. Before ordering, I called H&R to confirm fitment. I stated to the H&R rep that the...
  14. Tires, Wheels, & Suspensions
    I would like to get as close I can to a hellaflush look on my 2004 V, What is the lowest I can go without major refabrication and airbags? How can I get the most drop for my buck?
  15. Tires, Wheels, & Suspensions
    Looking at what is below to lower my car, I know that I will have to exchange top hats so they mount up correctly. My only concern is that I haven't seen a lot of lowered 2g's to see how low some have gone and how low simple strut/coil combo's take the V when you use parts for the 6th gen...
  16. Tires, Wheels, & Suspensions
    hello everyone i have a gen1 and wont to lower it but all i can find is 35mm springs. im looking for about 50-60mm so it will come down to the tyres. do any other springs fit off eg ek dc2 etc?? i also wont to just change springs for now. i am looking to fit bigger wheels what do u think the...
  17. Tires, Wheels, & Suspensions
    Well as some of u may kno i have a 98 V. She is currantly under construction due to some really bad front end components. I have researched and researched this myth that a camber kit for the 98 civic will work with my car. I ordered up a front and rear camber kit for a civic to use for my V. The...
  18. Tires, Wheels, & Suspensions
    If you were to lower a 2nd gen CRV, how would you do it and how low would you go??? Any suggestions? I definitely don't think I can do something like this by my self. I probably don't have the right equipment. But I do want it done sometime. I just want it a little lower, not to the point...
  19. Do-It-Yourself / Mods
    Well I am in the process of completely overhauling the suspension and was wondering how many options there are for lowering the CR-V 1g. I was thinking this thread could be end up being stickied and be a guide for new crvoc members so post actual facts and brands please.
  20. Performance Modifications
    I have question about lowering my 1 gen 98 honda crv awd. I just bought a skunk 2 coil over and I was just wondering before I started. Does it take long to do and how hard is it to installed. Does anyone on here have a write up instruction on it. I have lowered Integra, civic, del sol, accord...
Top