Honda CR-V Owners Club Forums banner

lug

  1. 1996 CR-V 1st gen. 4 hole lug

    Gen 1: 1996-2001 CR-V
    Hello. I am looking to purchase a CV axle for my van but my rims are 4 hole bolt pattern and all the info online and parts i find are for the DEV with the 5 hole rims. Do anyone know if the cv drives are the same or know what other honda use the same cv joints as the cr v with the 4 hole rims
  2. Wheel Lug Pattern

    Gen 3: 2007-2011 CR-V
    I have been looking for some used custom wheels. I have seen a bunch of websites that state the lug pattern as 5 x115. Is there such a lug pattern? Someone told me that the people who have 5x114.3 wheels are rounding up the size to 115. Is this true? Are people really doing this? Please...
  3. wheel lug torque

    Gen 4: 2012-2016 CR-V
    Hi, new on here and I'm looking for the correct lug nut torque for my 2013 CRV EX with 17" aluminum alloy wheels. I've read the owner manual cover to cover and don't find the info Thanks folks
  4. Different wheel lug nuts for steel vs aluminum oem wheels '08 crv?

    Gen 3: 2007-2011 CR-V
    Hi, I've searched the interweb and this forum, and keep getting different answers. For an '08 crv, are there different wheel lug nuts for steel vs aluminum oem wheels? I got a set of oem honda steel wheels for my girlfriend's '08 for winter tires, and have been using the same wheelnuts from her...
  5. Replacing the lug studs in a '14 CRV is apparently a LARGE project?!?!

    Maintenance and Service
    A few weeks ago, I needed a front lug stud replaced on my '14 LX AWD. The mechanic informed me that it's not a simple swap job because the design of the wheel doesn't allow for a new stud to be inserted directly. Is this a common occurrence with CRVs? I'm actually kind of appalled by this...
  6. Wheel Fitment - Lug Nutz

    Gen 3: 2007-2011 CR-V
    I want to put 2005 Acura MDX wheels/tires on my 2009 CR-V LX. Lug Patterns are the same, 114.3 X 5, both are 17" rims,I believe that Honda is 6.5" wide, the Acura may be 7" wide. Wheel Offsets are within 5 mm, I believe Honda is +50mm, Acura +45mm, tires on rims now are Honda: 225 65 r17: and...
  7. Anyone know the torque specs for lug nuts on 2016 CRV

    Maintenance and Service
    Anyone know the torque ft/lbs specs for lug nuts on 2016 CRV? Just had the tires rotated and not sure they put the lug nuts back on as tight as they need to be. I have looked thru the owners manual and this kind of info is not there.
  8. Lug nut size for a 2005?

    Tires, Wheels, & Suspensions
    What size are the lug nuts on a 2005 CR-V?
  9. Lug nut size/type for 05-06?

    Tires, Wheels, & Suspensions
    Tried looking for an answer on google but I couldn't find a definite answer. I want to buy extended lug nuts for my wheels but not sure about the size/type of lug nut I should be looking for. This is the look I'm after
  10. Need help on changing front lug stud on 2005 CRV AWD

    Problems & Issues
    I've read somewhere I need to shave off about 1/3rd of the lug stud to sneak into the front hub on my 2005 AWD CRV. Do I just have to do this on one side of the stud on the head? I'm just trying to figure out where exactly I need to grind down the stud?
  11. Wtb...........two piece lug wrench

    Trading Post
    For my CRV, sorry I don't do craigslist. Hopefully you got them lying around, maybe a Part's [email protected] Thank's, David g.
  12. 2015 Lug Nut Size

    Tires, Wheels, & Suspensions
    Can anyone confirm the lug nut size for the 2015 CRV? Thanks!
  13. broke lug while rotating wheels.

    Tires, Wheels, & Suspensions
    Hey everybody. I over tighten my wheel lug nut while trying to rotate my tires after ~7k miles. Then I broke it. (I kept the broken lug nut (with the lug in it as a reminder of my error. ) So how much should I expect to pay to had it replaced? Is replacing a lug that a beginner can work on...
  14. honda/acura 5 lug 17 on 1997 honda crv will they fit?

    Tires, Wheels, & Suspensions
    I just bought my first crv today,now i'm already looking to replace the stock tires on it.found some 5 lug 17 acura/honda wheels with tires,now I;m not certain if they will fit does anyone know why they wouldn't work.lug pattern is same would the hub size cause any issues with my all wheel drive...
  15. Spare stolen

    Tires, Wheels, & Suspensions
    Within the last week the spare tire and cover was stolen off the back of my 2002 CRV ex. If I cant find an OE wheel on the cheap somewhere I will settle for a steel wheel. It looks like cheap covers can be found on amazon.com. To prevent having to go through this again I will get a lock. Does...
  16. Left front lug stud strip replacement

    Problems & Issues
    Hi, Have a 08 CRV that went to the Honda dealership for a regular B 16 scheduled maintenance. While there the service engg. tells me that the left front lug stud strip needs replacement, $103 labor + $26 for the part. Is that cost typical ? Should I try my local gas station service center or...
  17. Lug question?

    Tires, Wheels, & Suspensions
    I currently have a 2010 LX with steel wheels. I am picking up some 07 EX-L wheels and was wondering if my current lug nuts will work with the EX-L wheels? Thanks for your help guys!
  18. 7-spline lug nuts problem

    Problems & Issues
    I bought my 2008 LX used with after-market Liquidmetal Racing wheels that have narrow 7-spline lug nuts. I'm finding out now that no store around here has a fitting key for these (Discount Tire, Orilley, Autozone, Pep Boys, etc). I'm taking a chance on this item I found on eBay, it is the...
  19. 1st Gen Wheel Lug Studs Question

    Tires, Wheels, & Suspensions
    I need 1/2 inch longer lug studs due to the offset of my S2000 wheels. Should I go with extended lug studs or wheel adapters?
  20. What is the size of the wheel lug nut of a 3rd Gen Cr-V?

    Tires, Wheels, & Suspensions
    Seems I cannot find it anywhere. Need to buy sockets, what's the correct size of the wheel lug nut of a 3rd Gen Cr-V? Thanks, :)
Top