Honda CR-V Owners Club Forums banner

manifold

  1. Skunk2 intake manifold doesn't fit

    1996-2001 Official Specs, Features, Etc. (Gen 1)
    Hey Guys, Does anyone have the Skunk2 Pro Series intake manifold installed? I took it to my machanic and he said it doesn't fit. I called Skunk2 and they said to send pics, so I did. At first they said they were going to send me another one.Then emailed me the next day and said that it will only...
  2. Gen 4 - 2.2IDTEC intake manifold and egr clean

    2012-2016 Official Specs, Features, Etc. (Gen 4)
    Hello all I have a 2013 CRV diesel that needs an intake manifold and egr clean. Is there a decent ‘how to’ guide out there? Thanks
  3. would a K20A3 intake manifold fit on a k24a1 engine?

    2002-2004 Official Specs, Features, Etc. (Gen 2)
    I need a rotary valve for my 2003 honda crv, thinking of buying a used intake from which the rotary valve has been tested. Would and intake from a k20a3 acura engine fit on my k24a1?
  4. gen 1 or 3 intake manifold swap on a gen 2 crv

    Problems & Issues
    Can I swap Gen 1 or Gen 3 intake manifold on a Gen 2 motor? If so what would I need to make it fit? Gen 2 are notorious for IMRC issues. I need to replace the IMRC assembly on my 2003 V, and want to avoid running into the same issue with an intake from that generation. The V has a P1077...
  5. 2002 Intake Manifold Vacuum / 2 Air in-take Hose Question SOS HELP!

    2002-2004 Official Specs, Features, Etc. (Gen 2)
    Hello, I just completed replacing my original starter motor with a new starter and reinstalled the Intake manifold and ready to reinstall the remaining parts... Can anyone tell me where E-8 and E-2 hose come from that is supposed to go on the right-front of the Manifold? Please see...
  6. One exhaust manifold - twin exhaust in the rear?

    Under The Hood / Performance
    Pondering my new '18 EX I realized that in the back are twin exhausts. I popped the hood and in the mass of plumbing and unfamiliar (made my Passat V6 look sensible!) parts I couldn't spot the manifold or exhaust to the back. I'm ready to be embarrassed with the obvious answer if someone could...
  7. JDM B20 w/ P8R Head/Intake Manifold

    Do-It-Yourself / Mods
    Hello guys I have a (First Gen)1999 Honda CRV AWD Automatic, and I currently am waiting for a JDM B20 from HMotors. The sales rep told me I would have to change my intake manifold from my old motor and put it on the JDM motor, he said the JDM motors intake manifold was a P8R, along with the head...
  8. 2002 crv. Exhaust manifold cracked 2 liter petrol

    Problems & Issues
    I have owned 3 older CRVs , and this is the first time I have seen this problem. When chatting to a local garage , he said it was common ??? QUESTION : do the older CRVs have a history of cracked manifolds ? QUESTION : this is the pre V-tec motor 2 liter petrol - what other models have an...
  9. Trouble removing stripped/stuck locking nut from exhaust manifold

    1996-2001 Official Specs, Features, Etc. (Gen 1)
    So as the title says, I'm having trouble with this part of my work. I have all the exhaust fasteners off bar one. I fear I've stripped this nut out, and I am at the end of my rope with the whole thing. I've heated it, and tried hammering a slightly smaller socket on, but nothing has worked so...
  10. How to find exhaust manifold for '98 EX AWD? (Northeast)

    Problems & Issues
    Just found out from my mechanic I need another exhaust manifold for my 98 EX AWD since the one I have is cracked -- or so he says from the noise, currently the manifold is blocked from view because of a heat shield mounted w/rusty bolts (I trust him so I know he's not trying to rip me off)...
  11. Intake Manifold Removal, New Gasket Required??

    Problems & Issues
    I am planning on removing the intake manifold to replace the IMRC assembly and was wondering if a new intake manifold gasket and bolts are required when I take the intake manifold off?
  12. 2004 Reduced performance after starter replacement (intake manifold)

    Problems & Issues
    Hello gang, I had to replace the starter on our 04 CR V last week, which involved removing and reinstalling the intake manifold. The starter now works fine, but my wife has noticed some reduced fuel economy since the repair. We used to get about 230 miles per tank, now we are only getting just...
  13. Replacing the Starter in a 07 CRV EX-L - Intake Manifold Removal

    Maintenance and Service
    About a month ago, I started noticing that my CR-V was lagging a bit to start as I turned the key in the ignition switch. It's like it was taking longer for something to engage and fire up the engine. The trouble was intermittant, but progressively grew worse and about a week ago, the car...
  14. Replace intake manifold rotary control TSB#5-052

    Problems & Issues
    I have gotten the dreaded P1078 code with Mil light turning on. It seems I need to replace the intake manifold rotary control (17120-PPA-AO1). My 2004 LX CRV only has 101,000 miles but the IMRC has crapped out at high RPMs. I don't fear doing the work DIY, but I would like to have some guidance...
  15. K20a2 manifold on K20a4?

    Under The Hood / Performance
    Hi guys, Can someone tell me if a K20a2 (Integra) intake manifold + throttle body would fit a K20a4 (CR-V)? Regards, P
  16. Exhaust manifold bolts

    Under The Hood / Performance
    I'm replacing the head gasket on a 2000 CRV and the manual calls for replacing the exhaust manifold bolts and nuts. Is this really necessary, and if so, is there a good source other than the dealer? Ken 2000 CRV-EX
  17. 99 crv intake manifold bottom centre bolt

    Problems & Issues
    I cannot for the life of me remove the bottom centre nut on my intake manifold (nearest the timing belt side of the engine). I have pushed aside wiring harnesses and all sorts to get to it, but can only just get the socket onto the nut at an angle, so it slips off when i try to turn it. Does...
  18. 2013 CRV plastic intake manifold? Am I missing something?

    Under The Hood / Performance
    So we just purchased this baby last week and as I was looking this AM in the engine bay I noticed that the intake manifold is made of plastic. Would this pose a problem down the road? Is there another model that uses metal intake? I suppose the CRV engine is derived from other models?
  19. Intake Manifold suggestion

    Under The Hood / Performance
    Im looking to upgrade my Intake, I just want a couple suggestions or tips on doing this. Really I just want to teach myself how to work on my car(s). If I gain some HP and MPG on the way that would be good to. I have the space and tools, now I just need a bit of know how. So far other than the...
  20. 1ST GEN SKUNK 2 INTAKE MANIFOLD NEEDED For Final Phase of Mods.

    Under The Hood / Performance
    Hi everyone, I have not been regular here for a couple of years (started a family) so I am picking up where I left off a few years back when I completed my stage 3 mods on my 1st gen Vee. For a few pics of my baby see here...
Top