Honda CR-V Owners Club Forums banner

molding

  1. CRV Side body molding

    2017 - Present Official Specs, Features, Etc. (Gen
    Is the molding worth getting? Dealership charges $350 including labor. Was thinking about doing it myself. Does it really protect against dings and scratches?
  2. 1st Gen Window belt molding replacement??

    Exterior
    Hey folks, The rubber on the belt molding (the horizontal trim on the OUTside of the window, mounted to the top of door) on my '98 is shot. I live in CO so the snow is melting down into the inside of the door causing problems. The paint has flaked off long ago. Not worried about appearances...
  3. Body Side Molding

    Exterior
    Seeking comments on the true Honda chrome? Body Side Molding and other full sets of mouldings that overlay the original. Will go on 2018 EX-1 Thanks
  4. Do you like your 5th-Gen Body Side Molding?

    2017 - Present Official Specs, Features, Etc. (Gen
    I went through the "Envy" thread and noticed that most people don't have the color-matched body side moldings. For those who do have them, do you find that they've been advantageous? Another related trim is the color-matched Door Edge Guards. I know my 4Runner has a lot of chips along...
  5. 2000 CRV Side Molding

    Exterior
    2000 CRV Side Molding/Trim? I have a 2000 with really faded side moldings. I tried the heatgun--which I really regret--then tried sanding it down a bit which worked great for a while, now the one side I worked on looks much worse then when I started. I am about to spray them and am just trying...
  6. ?17 CRV EX-L side mirror molding issues

    Problems & Issues
    Does anyone else see an opening on the right side passenger side mirror in this area? There is no opening like this on the drivers side mirror.
  7. Side mirror molding problem

    2017 - Present Official Specs, Features, Etc. (Gen
    Does anyone else see an opening on the right side passenger side mirror in this area? I don?t see it on the drivers side.
  8. Exterior Door Molding

    Exterior
    I have a 2002 Honda CRV that I purchased new that has the body cladding installed instead of the standard door trim. It has become faded and is falling off after all these years, and I want to replace it. I discovered however, that Honda no longer sells the body cladding. Can I simply remove the...
  9. Body side molding on Touring?

    2017 - Present Official Specs, Features, Etc. (Gen
    I was looking at body side moldings for my Molten Lava Touring but I'm afraid with the extra bling on the bottom it would be too much. Has anyone done this? Could you post a picture of it? Thanks
  10. window outer molding

    Problems & Issues
    HOw do i fix the outer molding of a window. I have a 2007 honda crv, It has melted. do i need to take the inside panel of the front door off? and i dont for hte rear door? Thanks
  11. After sale purchases : protection package, body side molding, hondacare etc

    2017 - Present Official Specs, Features, Etc. (Gen
    After you strike a OTD price deal with the dealership, do they try to persuade to sell you items such as : Protection package(includes wheel locks, splash guards, cargo tray) body side molding Pinstripe Door Edge Guards Extra Tinting Hondacare Which of the above is the most necessary to be...
  12. First GEN windshield molding

    Problems & Issues
    I recently had a new windshield installed on my V. The shop used an aftermarket molding as a replacement for the factory. I'm not sure that the aftermarket molding they used matches the factory. I was wondering if anyone could post pictures similar to these so that I can compare. I've been...
  13. First gen windshield molding

    Miscellaneous / General CR-V Discussions
    I recently had a new windshield installed on my V. The shop used an aftermarket molding as a replacement for the factory. I'm not sure that the aftermarket molding they used matches the factory. I was wondering if anyone could post pictures similar to these so that I can compare. I've been...
  14. Body Side Molding on 2017?

    2017 - Present Official Specs, Features, Etc. (Gen
    Any thoughts on the body side molding for the 2017? Just bought a Touring and was thinking about it - it saved me many a door ding on my 2013, but I'm not 100% sold on the look of these for the 17s... There is a picture of one with them on the Honda website, but I can't get it to save to...
  15. Silver Molding Removal

    Exterior
    My wife drives a 2012 CR-V and wants it all blacked out. We are there with the exception of the chrome molding that goes all the way around both side windows. I don't want to plastic dip them and don't want to permanently remove them. Does anyone have a better solution? I thought about buying...
  16. Body Side Molding - SAVE THAT PAINT!

    Exterior
    Sportwing Body Side Molding are great, and the colors match so well --- I don't know why my car was made without such protection, but it sure was easy to add it later to protect the paint from people in adjacent parked car that could care less if they bang up your car doors. See Picture of...
  17. 97-01 First Gen Body Side Molding Removal Tips?

    Exterior
    I've been searching and searching the CRVOC forums on how to remove the plastic side moldings on the exterior doors. Can anyone give me some tips on how to remove these plastic trim pieces without damaging/breaking clips? I would like to paint them off the vehicle to color code them like the SE...
  18. Exterior Window Molding Piece for 2003 Model

    Exterior
    Greetings from West Virginia, and thanks in advance for any help you can give me. I bought an older CR-V last year, and I love it. Just recently I noticed that the trim around the bottom of the windows seems to have deteriorated, cracked and broken. I want to replace these parts, but I'm not...
  19. 2014 CRV Lift Gate Finish Molding Repalcement

    Problems & Issues
    Hi - I have a 2014 CRV and need to replace the finish molding on the lift gate for it, has anyone had experience replacing this part? Will I need to remove the interior plastic on the lift gate to gain access to the 4 bolts for the piece? If so does anyone happen to have a procedure handy to...
  20. 2001 Honda CR-V SE Door molding

    1999-2001 Official Specs, Features, Etc. (Gen 1.5)
    Friends, Family and others. I am in need of the part number or description of the clips that hold the door molding highlighted in the attached image... assuming it attached. Some of the clips broke, it looks like they slide into a pocket in the molding then push into the hole in the door. I want...
Top