Honda CR-V Owners Club Forums banner

muffler

  1. Bar above muffler rust

    2002-2004 Official Specs, Features, Etc. (Gen 2)
    Hey everyone, When I dropped the muffler to install a hitch on my 03 CR-V I found a bar that is rusted completely through. The rest of the vehicle is completely rust free.. anybody know of a replacement bar or what it's for? Assuming it's for chassis stiffness..
  2. Lift Exhaust?

    1999-2001 Official Specs, Features, Etc. (Gen 1.5)
    Hi there, my name is Sebastian, I am from Germany and I recently purchased a 2000 Gen1.5 CRV with 140k on it. We used to own a Gen 1 a few years back in New Zealand and when we saw this one, got a bit nostalgic and gave it a go. I am currently thinking about getting OME springs for lift, or...
  3. Muffler or cat back exhaust... anyone??? Gen 2 models

    Under The Hood / Performance
    I am trying to change the sound and have always dont cat-back systems but I can't find **** for my CRV. Am I going to have to make it myself, or just keep the stock. What's everyone else running and cost if you don't mind. Thanks and have a great weekend
  4. muffler proximity to wheel

    Problems & Issues
    Muffler proximity to wheel?? Hi all-first time poster,here goes: son has 02? cr-v--said he had a hot wheel and burning smell, so I assumed a frozen caliper--but it is not a caliper. After that, I confirmed caliper operating nominally. I drove it, stopping frequently, and eventually got the...
  5. 2004 Muffler Delete

    Under The Hood / Performance
    So I wanted to change up my exhaust on my 2004 Auto and initially I was going to do a 2.25" catback exhaust with magnaflow muffler in order to "improve" performance and gas mileage. After lots of research and finding out that only my peak HP would improve slightly it seemed rather silly to do...
  6. Aftermarket muffler for 06

    Under The Hood / Performance
    Am thinking of putting a new muffler in my gen 2.5. I am looking for a smooth rumbling sound, nothing too loud or high pitched at high rpm. Something that gives a steady tone without making the V sound too ricey or a trying hard racer. I want to keep its SUV quality but add a bit of muscular...
  7. 2.3 Inch inlet Muffler for CRV Gen 1 Auto???

    Under The Hood / Performance
    Hi CRV Lovers... I would love to ask your professional advice regarding CRV Gen 1 Exhaust Setup... I have a CRV Gen 1 150HP Auto Transmission...All stock without any modification on the engine and exhaust system... Just now I just pick up FGK Fujitsubo Giken Legalis R Muffler with 2.3 inch Inlet...
  8. 2013 CR-V Muffler paint flaking off

    Problems & Issues
    We just bought a 2013 CR-V on 12-6-12. I noticed two days later what appeared to be paint flaking in a few areas of the muffler. As soon as I touched it with my finger the paint literally just fell off in small pieces. I have looked at several cars on the lot and even a few I have seen in the...
  9. 2012 CR-V Muffler Paint?

    Problems & Issues
    I was doing some work on my 2012 CR-V and I noticed that the black paint on the muffler is flaking off in a few areas. Quite frankly, I've never had any of my cars do that before. Do you think it's worth bringing to the attention of my dealer or am I better off simply touching it up myself with...
  10. 2000 CRV exhaust B-pipe flange failed -- need gasket?

    Maintenance and Service
    At the end of August 2012 the flange on the end of the B-pipe rusted off, and the muffler swung down, though fortunately doesn't touch the ground and didn't break the bottom of the bumper. It's sorta odd that the B-pipe flange fails before the pipe rusts through. At first I was going to go get...
  11. Quick Tip: 2012 Muffler Paint

    Exterior
    I've had my 2012 EX-L AWD about a month now, and I noticed that the paint had chipped or flaked off the painted muffler body just below the tailpipe. I found that Rustoleum High Heat (up to 1200° F) black spray paint fixed the issue. It blended perfectly with the existing paint finish on the...
  12. dropping muffler to install hitch

    Racks, Hitches and Towing
    Is it an easy job to drop the muffler on 3rd gen crv to install a class III hitch. Do I need any special tools? Thanks for all replies.
  13. 2008 CRV - Blowing White Smoke out Muffler

    Problems & Issues
    Hello, out of no where today my 2008 CRV had White Smoke coming out the Muffler. Then suddenly the engine light, VSA and exclamation light went on. This happened at out no where. I drove my car to work, no issues. I went to lunch, it felt like it was going to stall at a light. I was going...
  14. Bend muffler tip & cracked wndshield same day dilemma

    Problems & Issues
    I posted cracked windshield before and now I found my muffler tip was bent. My daughter told me about the cracked windshield but not the bent muffler tip just noticed it last night. Muffler replacement cause $308...Arrrrrggggh. I am still working on my windshield claim OEM cost $588.00 with $250...
  15. Any ideas on a quiet performance muffler?

    Under The Hood / Performance
    I just got a 2010 cr-v. I'm lookin to put a performance muffler on it but don't want it annoyin the hell out of me while we're driving. This will be our "travel" vehicle. So i'm attempting to keep it quiet for a change, unlike all my previous vehicles. LET ME KNOW!
  16. How to remove muffler from hangers '09

    Racks, Hitches and Towing
    Solved--How to remove muffler from hangers? This is my first post here and while I have tried to find a post related to my problem I have had no luck. Maybe you can help. I have a 2009 CRV 2wd and my problem is simply removing the hangers so that I can drop the muffler for a hitch...
  17. HELP! Will this muffler fit

    Under The Hood / Performance
    Flowmaster Super 44 product number 942548 will this fit on my 2009 crv?
  18. Gen 1 with 06-08 Si Muffler?? anyone?

    Under The Hood / Performance
    Looking to replace my "rusting" muffler with something a bit nicer i guess is the word. A friend of mine has an Si and it sounds nice enough and looks good too. Has anyone ever tried to transplant the OEM Si muffler to a Gen 1 CRV? I would love to see picts or hear about it. thanks.
  19. 1998 crv exhaust muffler replacement help needed.

    Maintenance and Service
    Hello, I have a 1998 crv and tryed changing the gasket between the back box and the centre pipe today but cannot bolt the back box back onto the exhaust. I had to saw the bolts off cos they were too rusty but kept the springs. I have got a new plate with bolts on it from hondas and a new gasket...
  20. What muffler to get?

    Under The Hood / Performance
    I have a 98 V and i am looking for a muffler and maybe some pipes. I am interested in the OBX catback but i dont really know anything else that would sound good with the V's engine. Tell me some opinions and other set ups i can get.
Top