Does anyone know the amount of oil needed (including a filter change) to have the resulting oil level be exactly in the middle between the Min and Max holes?
I have grown tired of siphoning out my dealer overfills, so I am going to have my mechanic do my oil change with Honda oil and a filter...
I am sure this was asked more than a few times, but I am relatively new here and could not seem to have the search bar work to well for me. Nothing comes up with keywords I put in. Ended up going back and forth from googling threads on google.com...
Anyway, the maintenance minder B16...
I am getting ready to rebuild a rear strut on my 2000 CRV SE. Does anyone know what size cup or socket I will need to drive the bushing into the shock? It has to be a cup or socket because of the way the bushing is made - I had to order the bushing from the California parts depot and I want to...
[I] am looking for a transmission for my friend who has a japan built CRV.
We live in eastern Tennessee.
He found one at a yard with a 12 month warranty for 1100.00 which sounds a little high to me.
Does anyone have any suggestions here in TN?
I am not a mechanic. I really do not understand why gas gets in the oil. From what I have read on this site, temperature of climate and the engine in the CRV seem to be the reason for gas getting into and staying in the oil. If the engine is designed to rid the gas from the oil by means of...
I would appreciate if somebody shows me where can I download (or in worst case buy) Service repair/workshop manual for Honda CR-V model year 2019 so for the newest.
Thank you in advance.
Hi everyone, our 2017 CRV is showing service needed on the dash. B1 Service. We don’t drive it much, only has 9100 miles. We’ve have one oil change in March per the Service Minder. Drives fine with no issues (we both really like the car!). Local Honda dealership where we purchased is saying it...
I've searched the internet fairly far and wide, but can't find any good video of someone getting to the wiper linkage of a 2006 CRV.
Only my passenger side wiper is moving right now. I think a piece of the linkage is broken, but it seems like a ton of work to get to it. I don't have...
On my '99, i want to fool around under the resonator...check the injectors, look for a vacuum leak and etc.
I gather that all that it does is quieten the air flow going in to the motor. Does it do anything else?
Has anyone found or pulled their door panels off to see what the ohm loads are on the speakers for an '18 EX-L? I was told the the ratings would be smaller for the front door tweeter and bass speakers as compared to the rear door tweeter and bass units. Thanks!
My 2008 Honda CRV front driver side struts are leaky. I think the front passenger side also has some rattling noise.
My mechanic suggested to replace both the front struts. He also suggested to consider replacing the rear sides, if I'm interested.
The mechanic suggested to buy the complete strut...
I can replace my tailgate(the bottom metal part that swings out) gas strut with an aftermarket strut and diy making it fit but I have no idea how strong the it needs to be becuase my CRV came with the strut worn out, they come with an Mpa or Nm rating or probably similar in psi, a 250Nm strut...
Hello CRVOC members
I am seeking advise on a set of Ball joint that I need.
does anyone has experience using, Febest,TRW, or Altrom Ball joints?
I need new ones and these are advertised as direct OEM suppliers or at least same Quality as Honda.
I have a 2014 CRV. I was very disappointed when I found out that the roof rails available for it from Honda were flush rails, not actual above the roof roof rails. I need above the roof roof rails for the Thule rack system that I have which straps around raised roof rails. Does anyone know of an...