Honda CR-V Owners Club Forums banner


  1. How tight the outer tie rods?

    Do-It-Yourself / Mods
    2006 Honda CRV with 175000 on the OEM suspension. I replaced the front and rear shocks/struts and outer tie rods, but think I messed up on the tie rods. How tightly do you cinch down the outer tie rod? Most suspension parts you want to be in there tight, but I'm pretty sure I over-did it. As...
  2. Tie Rod Ends (Outer vs Front Outer?)

    Problems & Issues
    I'm looking at the tie rod ends at rock auto for a 2005 cr-v. I'm seeing outer and front outer. What's the difference? While we're at, does anyone have any recommendations about which of those brands to go with or avoid? Thanks.
  3. window outer molding

    Problems & Issues
    HOw do i fix the outer molding of a window. I have a 2007 honda crv, It has melted. do i need to take the inside panel of the front door off? and i dont for hte rear door? Thanks
  4. How do I remove the outer door handle/lock cylinder from my 2006 Honda CR-V?

    Maintenance and Service
    Hey guys, I'm changing the door on my 06 Honda CR-V and in order for my key to be able to unlock it, I need to make sure I switch the cylinder from the old door to the new door.. I got the handle off after some time, and now I'm stuck with the actual lock cylinder portion.. How do I remove it...
  5. '08 CRV - Left front wearing on both outer edges

    Tires, Wheels, & Suspensions
    Hi all, Have an '08 CRV with Kumo tires (very happy with them) but just noticed my left front is wearing down at the edges - both the outer and inner. The tires are rotated every oil change and the other 3 are fine. Double checked the left rear, since it is the sister tire and all its tread...
  6. How to Replace Outer Tie Rod

    Tires, Wheels, & Suspensions
    First of all, Sorry If this topic had been already discussed or written up. I've already did a "Search" on this website and wasn't able to find what i need so please mind yourself from flaming me for I am a new owner of the CR-V. I'm looking for a DIY HOW TO: Replace a outer tie rod and rear...
  7. Trick to removing the outer handle rod.

    Problems & Issues
    I'm trying to replace the actuator in the rear right side door and for the life of me can't get the rod out of the outer handle. Searching around doesn't yield any results other then people saying they were able to. :confused: Anyone know the trick to this? I'm worried about destroying the...
  8. Anybody know how to replace outer window trim molding?

    Gen 3: 2007-2011 CR-V
    We have an 07 LX and all 4 of the exterior window trim seems to be deteriorating (the trim that basically stops all debris from falling inside the doors). I don't know if this is common with CR-V's, but I would like to get them replaced. Finding the parts are not the problem, it's the...
  9. Gen 2 outer tie rod ends

    Maintenance and Service
    So i'm replacing the struts on my GF's CRV and noticed the tie rods are completely rotten and full of sludge. 2002 with 165,000 miles and the entire suspension system looks completely OEM and never replaced. I want to replace the tie rod ends but they are rusted nasty onto the inner tie rod...
  10. '08 CR-V Tailgate lower (outer) trim

    Problems & Issues
    Rear Tailgate Lower Garnish install. I have a new 2010 CR-V and the rear tailgate was left up so when the garage door was opened , it tore the lower garnish off of the tailgate. Has anyone had to install a new one. I think it looks pretty simple but there are two bolts that go through the...