Honda CR-V Owners Club Forums banner

p0341

  1. P0341 - Honda CR-V 2.0 2002

    Problems & Issues
    Hi. Got a Honda Cvr 2.0 Mk2 2002 with error P0341. A common fault with this engines it seems. Its usually a stretched chain, but are wondering if its something else aswell. Chain and tensioners got replaced at 200k miles and is now at 230k miles. Can it stretch again after just 30k miles? Or...
  2. 2006 CR-V Codes P0341 and P2646

    Problems & Issues
    Hi Everyone, I have a 2006 CR-V with 190k miles. The past 6 months or so, it has been burning/leaking oil, and it the check engine light comes on towards the end of the oil change interval. The engine codes are: P0341- Camshaft timing P2646- VTEC oil pressure switch malfunction I read that...
  3. P0341

    Problems & Issues
    Ok so I have a 2002 crv with a P0341 so far I have replaced both cam sensors, vtc solenoid assembly, checked for power and the issue of running rough, stalling with the P0341 code what am I missing?
  4. CEL Code P0341 07 CR-V

    Problems & Issues
    Hello! So I was working last night and my CEL comes on. The V continues on to drive normally and I finished my shift and got her home. Took her to Autozone today and had it hooked up to the "code throwing machine". Code shot - P0341 "CMP sensor A and CKP sensor incorrect phase detected"...
  5. 02 CRV crank, no start & P0341 code

    Problems & Issues
    Hello All First post here on the site. I am hoping other owners can help point me in the right direction. My sons CRV is having some issues. It will crank over like normal, but will not start. If you give it gas while trying to start it, it sounds like it wants to go but then dies. I also...
  6. 2002 AWD CR-V Timing chain / P0341 & P0301-P0304

    Problems & Issues
    Hi! My CR-V barely starts; Will stall at idle, and revs are rough at best. CEL is flashing, and I have P0341 (Camshaft Pos. A Circuit....), P0301 through P0304 I've only owned it since August 2017, and I know it was treated badly (paid almost nothing for it) This actually happened in February...
  7. Fault p0341

    Gen 2: 2002-2006 CR-V
    Ok guys I have an issue here. Truck threw a catalytic converter code so we replaced the catalytic converter it threw the 0341 code. Have read MANY threads about this and everyone of them ends with someone saying to replace timing chain due to stretch and jump. I removed the valve cover and set...
  8. P0341 cel / 2003 cr-v

    Problems & Issues
    Looking for some advice re. P0341 error. There appears be a number of causes for this error but the main one is that the timing chain has stretched beyond its limit. I'm looking for a way to confirm that the timing chain is the issue before purchasing the parts and tackling the job. Is it...
  9. 2003 CR-V P0341 Code

    Problems & Issues
    My engine light has been coming on for a few days, but it will also go out, only to come back on. It has been cold, around 2 degrees, and even though it is in a garage, it seems to be starting just a tad rough. By this I mean it may grind for up to 2 seconds, but never has done this in the past...
  10. 2008 Honda CRV P0341 Error Code

    Problems & Issues
    The engine light first came on in the winter after a really cold -30 night. My mechanic scanned the vehicle and there was an P0341 code. The vehicle runs fine, idles fine, so both he and I were a bit confused. He looked into the P0341 error which is the cam shaft sensor and there was some...
  11. 2004 P0341 problem

    Problems & Issues
    Hey need some help. I have a 2004 that has been having some CEL come on. Car has around 200K miles on it. Its been fine until recently. I had a bad code showing faulty upstream O2 sensor, which caused the car to chug and have horrible gas mileage. Had the sensor upstream replaced with Denso...
  12. CRV 03 Error codes P0341,P0302,P0301,P0300,P0304 Stalls on start.

    Problems & Issues
    Hi Guys This is my first post here, hope you can help me with some advice and pointers on the best way to proceed Well my 03 CRV auto is not happy stalls on start that is it idles lumpy and stalls when I try to move forwards or reverse. Had the roadside recovery guy run a scan which threw up...
  13. P0341 code on 2001 crv

    Problems & Issues
    I got this code and engine management light on. When the car is cold it starts ok and i can drive fine for a few miles and the light will sometimes be off. Then after about 8 miles the engine light comes on and the rev counter stops working and it runs badly. Once the car has cooled down the...
  14. P0341 code on 2001 crv

    Maintenance and Service
    I got this code and engine management light on. When the car is cold it starts ok and i can drive fine for a few miles and the light will sometimes be off. Then after about 8 miles the engine light comes on and the rev counter stops working and it runs badly. Once the car has cooled down the...
  15. 2008 CRV code P0341 what to do?

    Problems & Issues
    I had engine light on and sometimes VSA and ! light comes on. When I restart the car VSA and ! light go away , but engine light remains on. After scanning I find out that code is p0341. I took the car to honda dealership and they diagnosed faulty VTC actuator and possible loose timing chain...
  16. Code P0341

    Problems & Issues
    Hi guys im new to the forum and have to say its great! Currently I am getting code P0341 which is camshaft position senor or at least thats what it says on the internet, but i called my local honda dealer and they told me that a 2004 honda crv ex 4wd model dosent have a camshat position sensor...
  17. 2002 Honda CR V P0341 diagnostic code

    Maintenance and Service
    We had the check engine light come on a few days ago with not noticeable "side effects." This morning the vehicle wouldn't start. I got the code P0341. I am hoping that the camshaft position sensor is bad and needs to be replaced. Is this a same assumption? Thank you!
  18. Code P0341 Variable valve timing phase gap

    Problems & Issues
    CRV LX 4WD 2004 The MIL lamp came on. When DTC was done at an auto parts store we got the P0341 code. Please advise what actually may be the problem and is it a minor or major repair ?
Top