Honda CR-V Owners Club Forums banner

plate

  1. Recommend A Rear License Plate Frame

    2017 - Present Official Specs, Features, Etc. (Gen
    I'm looking for a rear license plate frame that will provide for mounting the plate and providing cushion and protection so that it does not scratch the paint nor allow the plate to rattle when going over roads, closing the hatch, etc. Yet another instance where Honda has scrimped to save a...
  2. License Plate Bumper Protectors

    2017 - Present Official Specs, Features, Etc. (Gen
    Anyone have one of those bumper protectors that are a frame for the license plate? I looked at one called the BumpShox XXL. I was wondering if people had pictures of it on their CR-V since I'm not sure if it will look good or if it will block the sensor. Thanks! I can only park on the street so...
  3. 2019 crv front license plate installation

    Do-It-Yourself / Mods
    Does anyone know the proper way to install the front license plate frame on a 2019 Honda crv?
  4. 2017 CRV - No Taillights or License plate lights

    Problems & Issues
    All the other lights and accessories appear to be working. The wife phoned the dealer service department and they said it was probably the bulbs. I've never seen all bulbs go out at once. I inspected the two taillight bulbs and no broken filaments and very little resistance with the ohm...
  5. New Olive Green '18 EX - Front Plate Crooked Swiss Cheese

    Greetings & Introductions
    Hi All. Just purchased an olive green '18 EX. Man we love the color! Problem though: dealer butchered the PDI and installed the front plate crooked. Holes are 1/4" off in height! On top of that, Einstein also drove in the mounting bolts so there are 4 holes instead of just 2! :kaboom Any...
  6. Roof rails for 56 plate?

    Racks, Hitches and Towing
    Hi all, I am soon to buy a 56 plate sport. I own a thule Trail rack but need a rail to put it on. I know bars can be bought but side rails? Cannot find any info on it. Thanks in advance. Julian
  7. Number plate housing snapped

    Mobile Electronics
    Hi..... Anyone give me a hand with this situation please. Wanted to change number plate bulbs (t10 bulbs) to led to match the rest of the car which has been changed to led too. I followed correct procedure to remove number plate light housing, one came off fine, the other one snapped 1 clip...
  8. 2008 skid plate fixings

    CR-V Owners in Europe
    Hi all, Bought a 10 year old CR-V EX earlier this year and noticed that some of the fixings are missing from the front and rear skid plates. Does anyone know where I could get hold of these in the UK? Difficult to find unless you know the sizes etc. Cheers Stevie
  9. 2018 License Plate Light replacement to LED??

    2017 - Present Official Specs, Features, Etc. (Gen
    Has anyone tried to update the License plate light on a 2018 CR-V to an LED? I have changed all other lights to LED...ie headlights low and hi and all interior cabin lights but cant figure out how to get the cover off to change the License plate light....just looking for anyone who has done...
  10. Trailer hitch bike rack - that doesn't cover license plate on a 2018?

    2017 - Present Official Specs, Features, Etc. (Gen
    I have a 2018 EX and was looking at a few trailer bike hitches (platform style). The problem is many of them look like they would partially or fully cover the license plate when folded up to save space. The 2018 seems to have the plate mounted down fairly low it seems. I happen to park next to...
  11. FS OEM Honda First Generation Stainless Front skid Plate

    Trading Post
    Original owner of this nearly impossible to find OEM Honda accessory for the first generation CRV! Just removed it from my 1999 CRV after years of service and looking super cool! A very high quality part. Spent a little time using fine steel wool to take off oxidation. Look how it shined...
  12. First Gen OEM Honda Front Skid Plate

    Accessories
    Does anyone know the original part number for this accessory?
  13. Front license plate falling off! [emoji852]

    Problems & Issues
    I've lost two front plates so far. Anyone have a rock solid bracket and bolts they can suggest? Thanks! Sent from my SM-J320V using Tapatalk
  14. 2015 CRV, front license plate

    Exterior
    Hi, I recently moved to a state that needs a front plate. I am from a state that didnt need it, so my dealer didnt give me anything to install in the front and the front is totally clean, no marking guidelines to install one. Whats the best way to install the plate. I dont want to pay a lot of...
  15. CRV 1.6 Diesel 2014 (64 plate) Cabin Squeak.

    2012-2016 Official Specs, Features, Etc. (Gen 4)
    Good evening My CRV has recently developed a very annoying low pitched squeak within the cabin. Thought it was brake pads and discs, however had them checked and they are fine. Have checked everywhere but to no avail. Even removed all contents from car as well as roof bars and bike carriers...
  16. Front license plate bracket.

    DIY Center Discussion
    Any one have diagrams or instructions for installing the front license plate bracket on a 2018 Touring.
  17. DIY skid/bash plate ?

    Do-It-Yourself / Mods
    Has anyone made one ? Can't seem to buy one anywhere in the uk
  18. HELP!! Rear number plate lights

    Maintenance and Service
    I own CRV 06, Both my rear number plate bulbs have stooped working. Checked bulbs - they are good unable to find which fuse is linked to them anyone have any suggestions on how to sort this or what the issue could be, i have my MOT on Monday and dont really want to fail for something as...
  19. Front plate for 2017 CRV

    2017 - Present Official Specs, Features, Etc. (Gen
    Sorry if this has been posted and I missed when I search for keywords, but is there a video of how to attached the front license plate to a 2017 Honda CR-V? Had a hard time finding a useful video on YouTube. Do I really have to drill holes into my vehicle? TIA
  20. 99 CR-V Timing Belt backing plate issue w/Pics...

    Problems & Issues
    I was driving down the expressway like a happy camper coming back from McD's wtih my breakfast burritos and Lg Sweet tea when a loud pop and some grinding noises came out of my 99 CR-V engine bay. It came to a halt given me just enough time to pull to the side. There was electrical power but it...
Top