Honda CR-V Owners Club Forums banner

project

  1. openpilot self driving project for '17-'18 CRV

    2017 - Present Official Specs, Features, Etc. (Gen
    with release 0.4.7 the openpilot project has added support for full self-driving for the 5th gen CRV! :jawdrop: https://www.youtube.com/watch?v=czZJcWU6K2g https://comma.ai/shop/products/eon-dashcam-devkit/ https://www.youtube.com/watch?v=62NIAyTxcjk
  2. LED DRL Project in 2015 LX Headlights

    2012-2016 Official Specs, Features, Etc. (Gen 4)
    Wife recently bought a 15 LX and was kinda bummed the headlights didn’t have the LED daytime running lights so I baked the housings and split them open and added two LED strips to each headlight where the EX LED DRLs would light up, wired them to an ingnition 12v source and bam! Turned out...
  3. Undercoating project.

    Maintenance and Service
    I have a new 2017 CR-V LX with 300 miles on it and not yet driven in rain. I decided to take the time to do an undercoating before the snow season hits here. They use plenty of salt/brine and God knows what else on the roads and it had a bad effect on the 2001 Subaru Forester we currently use. I...
  4. Replacing the lug studs in a '14 CRV is apparently a LARGE project?!?!

    Maintenance and Service
    A few weeks ago, I needed a front lug stud replaced on my '14 LX AWD. The mechanic informed me that it's not a simple swap job because the design of the wheel doesn't allow for a new stud to be inserted directly. Is this a common occurrence with CRVs? I'm actually kind of appalled by this...
  5. my first 4x4 Honda project - 98 awd

    Greetings & Introductions
    New to CRV and new to AWD but not new to building Hondas. Also, living in the desert means plenty of off road fun to be had. As any off road guy will tell you Honda is probably the worst choice of cars to build but being a Honda guy I really have no choice. I'm currently finishing my commuter...
  6. Project V (3rd gen)

    Greetings & Introductions
    Sup peeps, So about 2 years ago, I purchased an 07 EX AWD AT for a steal of a price. It was pretty banged up. Was used on a mail route. Well I let it sit for a while until I actually needed it. So for the initial assessment: The GOOD: Motor ran Tranny was replaced The BAD: was completely...
  7. 2000 CR-V project build(bass monster)

    Mobile Electronics
    Hello everyone, I am the owner of a 2000 Honda CRV. I'm taking my CRV in different route than most people do. I have been in the custom car game for over 20 plus years. so it's only natural when I buy a vehicle that the first thing I think about as customization. Even though I told myself once I...
  8. 2000 CR-V project build

    Mobile Electronics
    Hi guys and gals, I'm currently working on my 2000 CRV. I'm building a show vehicle slash daily driver. Have been working on it for the past three years. For stereo systems at Venom and now I'm currently working on my biggest one. I will have pictures of the bill posted up really soon. It is...
  9. 2017 Hitch is a major project

    Racks, Hitches and Towing
    I have a copy of the Honda .pdf and it looks like installing a 2017 hitch is a dealer only project. One dealer told me on the phone, the Honda standard for installation the hitch and harness was 2.2 hours. That looks a bargain based on what I saw in the 38 page installation manual. I think...
  10. Project gen 2.5 Gutted stock air box **Free mod for 2-5whp per hondata**

    Under The Hood / Performance
    Remove your stock air box and have a dremel with a plastic cutting disk and safety mask, glove, and glass. Then go to town on it like this **see picture below** It's a free mod if you have the tools. If you not have the tools then probably around 50 bucks to do. Still better than paying 200...
  11. Project gen 2.5 Light weight pulley :)

    Under The Hood / Performance
    Had these on when I had a 4 bannger accord with the k24a4 and notice that the car was lighter on its feet. So I decided to do the same for the CRV. Bought some light weight pullies that is from a base RSX/tsx. Ralco and UR are good brands, but I am pretty sure they all come from the same...
  12. Project gen 2.5 Port and Polish intake runners. Make your own Bolt on :0

    Under The Hood / Performance
    Here is the test subject with measurements. Planning to port and polish since there is not a lot of aftermarket support. So I made my own. I have experience doing i4/v6 accord runners so these should be fairly easy. Only thing that is annoying is pulling off the injectors and making sure that...
  13. 2015 Honda CR-V Radio Replacement Project

    Mobile Electronics
    Apologies if you'd rather have me post in one of my earlier threads - thought I should separate the general question from the actual project. I had a local audio shop install a Pioneer AVH-4200NEX in my 2015 CR-V EX-L. I also had them add two USB connections (you lose the OEM ones in the...
  14. PROJECT Gen 2 CRV UK

    Tires, Wheels and Suspensions
    I will make an attempt to make my Honda CRV 2.2 CTDI 2006 Sport to my taste ... I will be attaching pictures and videos links to YouTube related with the upgrades made to the vehicle will be available soon. Please subscribe https://www.youtube.com/channel/UCQN4dx-2LNasuaa6UJJiroQ/featured
  15. Can I project my iPhone Google maps nav on the CRV (2016 EXL no nav) touch screen?

    Mobile Electronics
    Is there anyway to connect my Google Maps to show on the in-dash touch screen (via USB cable?)? I hope I can use Bluetooth to connect the audio output of Google maps through the sound system, but is there a way to connect the car screen to the iPhone for visual extension as well? I suspect if...
  16. 05-06 Second Gen CR-V Projector Retrofitting Project

    Do-It-Yourself / Mods
    The parts are coming in... This thread will document the progress of retrofitting the headlights with projectors for the 2005-2006 year second gen CR-V. This is the car the project will be performed on. 2006 CR-V SE (Sahara Sand Metallic) The Morimoto Mini H1 Kit has arrived 7.0 MH1...
  17. 97-01 First Gen CR-V Projector Retrofitting Project

    Do-It-Yourself / Mods
    I've been cruising around with 8000K HIDs without proper projectors on my CR-V for awhile now and decided to do it right. I purchased a 2.5" BiXenon retrofit kit, an extra set of headlights, and G95P spray paint from eBay yesterday: 1) 97-01 CRV L&R Headlight Assemblies ($56.25)...
  18. Tomorrows fun project.

    Maintenance and Service
    Purchased a clean 2014 EX-l with 51k on it about 3 weeks ago with excellent service records. All oil changes and other required maintenance done at Honda dealerships. It has a tow hitch installed so i plan on doing a drain and fill of the ATF and changing the rear diff fluid as the last record...
  19. 3rd Gen OEM Headlights for Sale, Like New, Use for replacement or project

    Trading Post
    I no longer have my beloved 3rd Gen CR-V but still have the OEM headlights I took off it when I added aftermarket lamps. These are in excellent condition, no cracks, fading, yellowing etc. Good for replacement or for your custom projects (blackout, HID, projector retrofit etc). $125 for the...
  20. Honda Project 2&4 Concept is Just as Awesome as You Hoped

    Headlines
    Read more about the Honda Project 2&4 Concept is Just as Awesome as You Hoped at AutoGuide.com.
Top