Honda CR-V Owners Club Forums banner

rubbing

  1. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Hey guys, I have a 2006 Honda CRV with 102,000 miles. Automatic, AWD, stock (no major modifications). Great machine that I bought back in April 2020. Since I have owned it, I have noticed a low rumble/rubbing sound that engages when I accelerate from a dead stop. It doesn't affect...
  2. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    I have a 2003 CRV. If I drive very slowly, say 3-5 mph, I can feel a rubbing, and the car will actually sway left and right a little in sync with the tire or axle rotation, not engine rpm. At 30-60 mph, the vibration gets bad. I don't want to drive above 60 because the shaking is very bad...
  3. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I picked up my new 2017 Honda CRV EX (AT) a few weeks back. To date I have put 600 miles on the clock. A few days back I noticed a 'rubbing' sound when I applied the brakes. Sounds like I would expect worn brake pads to sound, but is there anything else it could be. I'll be furious if my...
  4. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    A while back we had a small accident that we hit a curb. Since then the passenger side tire rubs when I turn left. It rubs on the back of the well. What part can we adjust to solve this problem. When its jacked up everything looks straight but when its put back down the tore is pushed forward in...
  5. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    Hello All, I have been experiencing this issue with my year old CRV and its been almost a year since I noticed it. When I start the Car and put it in reverse to backup and then put it in drive and turn to drive forward instead of feeling the smooth turn of the steering column I and hear and feel...
  6. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    ok 1997 269,000 miles and need help the right/pass/ rear drum brake hub is rubbing the shoes. the axel is tight. also the brake plate is tight . But some how the shoes are rubbing on the brake hub and it is all the way around the shoes . I put shims to move the hub out but it is taking more...
  7. Tires, Wheels, & Suspensions
    Hey Folks! Done some research on the forum, but no answer to my question. I have a 1st gen V 2001. OEM tyres came with 15" alloy wheels 205/70. I want to put it a little bit higher and let it run with some mud/sand. I was considering putting on 215/75/15 on the OEM alloy wheels. Already read...
  8. Performance Modifications
    I have a 2005 2.2 turbo diesel and when cornering, (louder on sharp turns) there is a rubbing sound coming from the rear wheels. Any ideas what this could be? The noise is louder when there is passengers or weight in the back. Have checked tyre pressures and they are ok. Any ideas appreciated.
  9. Tires, Wheels, & Suspensions
    I recently put a set of Cragar soft 8 wheels on my 99' CR-V. Now they're 15"X7" with an offset of 6. I had to use a 1" spacer to get them to clear the front brake caliper and just to get an even look I used another set of spacers on the back that are 1" as well. Now before I put the rear...
Top