Honda CR-V Owners Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 20 Results
  1. Gen 3: 2007-2011 (UK 2007-2012) CR-V
    I had my 07 crv lx 4wd on 4x stands so I could lift my engine in order to replace the oil pan. I lifted the engine from just the motor mount on sepentine belt (passenger) side of the engine almost 5 inches while the driver side remained in place with loosely threaded bolts. Is it possible the...
  2. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Bought an 03 5 speed recently. Car shakes pretty good under load between 25-50mph-ish. It smooths out above 55mph but still shakes slightly under acceleration. I removed the driveshaft completely thinking the ujoints failed but the car still shakes just as bad. All motor mounts look good.
  3. Performance Modifications
    I've read a few posts about vibrations caused by failing crv prop shafts. I've just bought a 2005 diesel crv and the car dealer replaced the front prop shafts, however I seem to get a side to side wobble at low speeds in second gear. Any ideas?
  4. Gen 3: 2007-2011 (UK 2007-2012) CR-V
    I have a very strange problem, and I was hoping that someone could help. Short version: The steering wheel of my 07 CRV shakes noticeably at speeds 70-85(ish) mph. Seems to get better or go away entirely when NOT pressing accelerator. Does not shake when pressing brakes. Long version: A...
1-4 of 20 Results