Honda CR-V Owners Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 30 Results
  1. Diesel CR-V
    Hi All I have a 2008 3 gen 2.2dti with 103,000 miles on it with full service history, im feeling a sight vibration through the peddles whilst driving. any thoughts on what is causing it, any concerns and any way of fixing it ? Thanks for your views in advance. Bill
  2. Gen 5: 2017-2022 (UK 2018-2023) CR-V
    Does anyone else experience a slight pull back (feels like engine braking) about half a second after letting go of the gas pedal? This only happens at low speeds ~20-30mph. I know CVT’s sometimes have trouble figuring out gears at low speeds. Is that the reason?
  3. Gen 3: 2007-2011 (UK 2007-2012) CR-V
    I noticed for a few weeks now that my 2009 with 70,000 miles engine shudders and very gently hesitates while I try accelerating, but only when driving slowly and I keep the rpms below 2000. The problem has slowly materialized but seems to be getting more and more noticeable, as the days go by...
  4. Gen 5: 2017-2022 (UK 2018-2023) CR-V
    Hi all, My red C is so cute...but I need to ask about a couple of impact incidents, To see if anyone thinkS the car should be looked at by a mechanic amd may likely need repairs... 1. Got backed into in a parking lot, very light impact. So, left side of hatch door (and surrounding area) Has...
  5. Gen 3: 2007-2011 (UK 2007-2012) CR-V
    I have beeb hearing almost squeaky type of noise when slightly turning the car to the left when moving forward. If I tap on the brakes it temporarily (very temporarily) goes away but comes right back. 2010 CRV 4 WD has 187000 miles. I am second owner and purchased it from CARMAX WITH 65000...
  6. Gen 3: 2007-2011 (UK 2007-2012) CR-V
    Can't get my figure this one out on my 07 FWD. I've looked at the usual suspects. Sway bar links and sway bar bushings but seem to be OK. Ball joints seem good and so do the control arms. It only happens slightly once shifted back into drive from being in reverse and just barely hitting the...
  7. Gen 5: 2017-2022 (UK 2018-2023) CR-V
    I owned a 2017 EX AWD. I just noticed this sound today after parking I stayed in the car for a while and noticed it coming from under the dashboard. After I turned off the engine for a few seconds, this tiny clicking sound comes out. It's not loud, not fast; just a regular and slow clickings...
  8. Gen 5: 2017-2022 (UK 2018-2023) CR-V
    With my right foot lightly on the brake, allowing the CR-V to just creep forward (entering the garage), there's a split second slight surge in the throttle, then it's back to idle.......is this common? Thanks.
  9. Gen 5: 2017-2022 (UK 2018-2023) CR-V
    I noticed when I'm braking in the quiet apartment car garage, I can hear a distinct high-pitched whine. Anyone else have any experience with this? Anything to worry about?
  10. Brakes, Tires, Wheels, Steering & Suspension
    While getting tires rotated on my (new to me) 2004 CR-V EX today, I grabbed the tire and moved vertically and horizontally to check for play. No vertical play but I did feel a teeny bit of horizontal movement. This seems to be the cause of a shudder I experienced yesterday on the way home...
  11. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    (i'm new this this forum, so if this isn't the right place to post this, I apologize beforehand) So yesterday, I noticed that the car parked behind me hit my 2014 Honda CR-V rear bumper; it caused slight damage to the bumper and nothing to their car. I was pretty bummed as I just bought the car...
  12. Brakes, Tires, Wheels, Steering & Suspension
    Hello, I know all of the downfalls to putting different tread depths on an AWD vehicle but what are the limits? I want to buy these http://detroit.craigslist.org/okl/pts/4292587770.html and the tred depths are "Tread Depth: 2 tires: 7/32", 2 tires: 11/32", would this be ok or are the depths to...
1-13 of 30 Results
Top