solenoid

Hi all, My first post on this forum can be found here: Blinking "D" indicator and loss of power in... As stated, the CRV has a blinking D light, and rough shifts into any gear. The culprit based on the codes that I pulled off (p1298 and p1768) appears to be pointing to the single linear...

Hi folks Currently online I see the 2nd gen solenoid removal. The 3rd gen has a deflector on top. Does anyone have the instructions to remove the solenoid. The deflector and the wiring harness with the bolt torque is what I am trying to find. Sent from my iPhone using Tapatalk

I'm helping my dad with his 2003 Honda CRV. Last week the P1259 code came on while he was on his way to work, and the car would shutter around 3000 rpm. At first we assumed the shuttering was due to transmission problems. First thing I did was do a flush and fill on the tranny. Of course this...

Hello Everyone, I recently decided to buy a used 05 CR-V automatic with 158k miles, after hearing about these vehicles legendary reliability and quirky character. It drove really nicely and just had a minor exhaust leak when I bought it. I drove it everyday to and from work (16 miles) for...

Hi. Got a Honda Cvr 2.0 Mk2 2002 with error P0341. A common fault with this engines it seems. Its usually a stretched chain, but are wondering if its something else aswell. Chain and tensioners got replaced at 200k miles and is now at 230k miles. Can it stretch again after just 30k miles? Or...

I just bought a used 2005 Honda CR-V. The guy who owned it before me tightened the 3 bolts way too tight, so when I was removing them one of the bolts broke. I was able to get the broken bolt out, but when I went to screw new bolts on, another bolt broke in the same position. This time, even...

I have a 2006 Honda CR-V with 101,000 miles on it. I had recently purchased it from a dealer who got it from out of state (auction I assume). On the dealer's repair sheet prior to purchasing it states the dealer had replaced the timing chain. At about 99,000 miles I changed the oil and put in...

Hope to get some help! I have a starter that turns well but makes a noise and it seem the bendix or solenoid is at fault. It does start and I have to swing it again and sometimes more attempts to get it to start. When the car is hot there is no problem, it starts perfectly. Got the brushes and...

I've got a 2005 CR-V 4WD SE, 180K miles. For the past year, I've been living with the nuisance of the transmission shifting harshly from 1st to 2nd gear, and only from 1st to 2nd gear. It clearly doesn't happen when the car is still cold, but once the A/T fluid warms up, it happens...

Can someone point me to a tutorial on how to install an imrc control solenoid for a 2003 crv? I've tried the internet, the only thing I see if the rotary valve installation, and of course how it's done of fords. My shop won't be able to do it for another week. It seems simple enough, maybe I...

Hi, I had a check engine light with error code P1077. Mechanic did some troubleshooting and we ended up replacing the IMRC actuator assembly (Part no. 17120-PPA-A01 $285) and the Bypass control solenoid valve assembly (Part no. 36163-PND-A01 $120). All was great for a day. But.....after about...

Went the cheap route and bought starter solenoid only to fix my intermittent no-start problem. Didn't really look at what was involved to replace, or maybe was afraid of what I'd find. Anyone have any advice--just replace whole starter while there is access or can the solenoid be done in less...

Hello, Looking to replace starter solenoid on my 2001 CR-V. At my local parts stores, they are asking around $200-$300 for the solenoid. Checked ebay and found the part for under $30. Has anyone put a $30 solenoid on their car? I like the price, but maybe I am missing something important in...

My car was in an accident, engine, transmission, and suspension weren't harmed, except that the radiator pushed one of the transmission solenoids off the crimp. These are part numbers 28260-PRP-014 I dont know if it's the poor design of these parts, of they are meant to be break-away like...

Hello one and all. I am brand new to THIS particular Honda Forum. I need some help please. Very simple question/request. Can anybody please tell me the location of the LINEAR shift solenoid on my 2000 CRV AT 4WD? I already know and have replaced the Shift "Lock-Out" Solenoid but am still having...

Recently my 2017 Honda CRV started a ticking noise while the engine is idling, after 5 mins of driving it. I notice it when I'm in Park, or stoped at a stop sign. It's loud enough that it has become very annoying. I've had the car since June and started to hear this earlier this month. I brought...

I have a 2006 CRV that the trans feels fine in 1st, then when it goes to shift its slow (like it goes into neutral) and then a very hard shift to 2nd, could this be a bad/sticking solenoid? if so any idea which one? I would like to try to fix this rather than jump to replacing the transmission...

1997 Honda CR-V Throwing a P0441 Code on my scanner. I don't know if Honda generalized all EVAP issues under this code or if this just means "No Flow During Purge Cycle" What I have done -Replaced Purge Control Solenoid Valve (mine would not hold a vacuum with or with out power. New/used one I...

2005 CR-V EX, 240000 miles. This vehicle was given to me with a bad engine (jumped time). The owner didn't complain about any other issues at the time, I even asked if they had other problems with it when they brought it here. I replaced the engine and the first time I turned the key on, the D...

Hello, I have an 05 CRV 5AT and am having troubles with the shifter and light indicator matching up. All of the lights light up, but sometimes when the shifter is put into a gear that gear does not illuminate. This happens with P, R, N, D and D2. D1 does not illuminate at all. Actually, when...