Search Results for ‘spacers’

I just got some new wheels for my CRV RW1 Facelift these are the specs: 18X8.5 ET42 with the OE tires size of 235/60/R18, and I notice that the fitment in the front is perfect but the rear seems to be more inwards, so I thought of putting some 5-15mm spacers on the back rims to make the wheels...

Hey guys, I'm wanting to lift my 2004 CR-V by a couple of inches and I'm coming here for advice. I don't really want to get rid of the stock springs and shocks as I feel like they don't need an upgrade and I'm trying to avoid an entire suspension lift. I did an entire suspension lift on my...

I have a 2016 Touring model. Looking to put some spacers to push the stock wheels out closer to the edge of the fender. It for the look of the car, not a performance modification. Has anyone done this?

Hi All... I’m an Element owner. I recently purchased a rear lift kit for my Element but the manufacturer sent me the spacers for an 02’-06’ CRV instead. I wanted to see if anyone on here is interested before I list them on Craigslist. They are W44 American Steel and DOM Tubing, hardware...

Hello, I originally posted this in the wrong forum. i found online two types of spacers for the 2017 CRV, a 20mm and a 30mm set of 4 I was told that installing these will void my suspension warranty. I know that I have to get a full allignment after installing these. Does anyone here know if...

Has anyone done a 1 inch lift by using a 20mm strut spacers on a 2017 CRV - EX? another option is a 30mm which gives it over 1 inch lift. Reason is just for the looks. The AWD version looks nicer bc it is taller IMO. is this a good idea? do I need to do anything else to the suspension system...

Will 25mm spacers affect or damage the steering in a 99 LX ?

Hi I have been searching for information on lifting a gen 3 CR'V, I have a 2010 Crv. I am looking for stronger rear springs. The rear suspension just is not strong enough putting a few things in my trunk you can see the back is saggy. Ive seen many threads regarding the same issue but haven't...

Hello Friends Just looking for some advise from the CR-V forum family here, so I will be needing 4 new tires on my V. I figure why not go the extra mile and make the V look better. Currently i upgraded from stock 17 to HFP 19 inch rep (19X8) running pirelli 245/50/19 all season. I was...

I am looking at doing a 2in suspension lift with the spacers for my 2001 honda crv lx and i was wondering if any of you know a reliable website thats fair price to buy them.

Hey guys, I'm planning to raise my 2002 CRV with HDPE strut spacers. I work in plastics manufacturing and have a sheet of 20mm HDPE. I was planning to use a router to cut 2 spacers for each strut and either weld or use adhesive to stack 2 together to get a 40mm spacer. However, since my CRV is...

Hello everyone, I'm new here, so forgive me if a make a mistake o cause any trouble. I'm trying to lift my 2001 crv in a cheap and simple way, and im not sure how to do it and what to do. I've searched through the internet but the information i've found is always incomplete and lacking in...

I'm looking to put bigger tires on my '98, I don't necessarily want the diameter larger as much as I want them wider, what should I go with? Should I throw some spacers in there to get the look I want? Any advice is appreciated.

Just got a 1997 Honda CRV and after much reading there is not much out there to lift these things However, I have found the coil springs on Camel 4X4 for $260, but I would rather not invest that much money into this car. After tons of research I have found that most people will build their own...

Back again with more confusion. One: when y'all talk about using spacers to fit your 235/75 15 blah blah blah. are you referring to wheel spacers or suspension spacers?

I have a 99 crv that has been lifted with the bds 2" lift springs. I do not like how rough it rides so I'm wanting to have spring spacers made and go back to the factory springs. Does anyone know if it is possible to run a spacer bigger than 2"? I don't want to have brake line issues or anything...

What size spacers were used for it? I'm talking about the spacers that go between the top of the coilover assy. and the mounting point on the tower. I know with the Elements, using only a 1" spacer jacks the rear up like 3" in the back due to suspension geometry. I'd like to get some ideas of...

I was wodering if anyone had ever used wheel spacers on their V before. Anf if so is there a way to replace the wheel bolts to put longer ones in so the lug nuts wont come off.