Honda CR-V Owners Club Forums banner

splash

  1. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Hi All I was doing one of my first DIY oil changes, and when i removed the splash shield I found mysterious loose part resting on top of it: a plastic disc with a tube through the center that apparently dropped from somewhere up in the engine bay. How long it's been there, where it came from...
  2. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I just bought my first Honda CRV (and first car!) yesterday. Funnily enough we were on our way to buy a Nissan Rogue and stopped by a Honda dealership to test drive just incase. 5 hours later we drove off with our EX-L. Now that I've got it home, I'm already looking into getting all-weather...
  3. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Hi Is there an easy way to not have the honda screen and warning screen display on the head unit when starting car? Touring model. Thank you. Sent from my SM-G950U using Tapatalk
  4. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I apologise 6 in advance if I'm posting in the wrong place. Here's my question... I have a 2018 EX that had wind damage to the fenders back in March. After the repair in which the shop said they had to basically take my vehicle apart to match paint and clearcoat everything, I never really...
  5. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Has anyone else had issues with the tin splash shield that conceals the underside of the engine crumple and start to break off after driving through puddles of water? This is the second time I've had this issue. The first time it broke I figured I hit a spot of water on the road and it tore...
  6. Accessories
    Do you like the accessory Splash Guards?
  7. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    Is 2015 CRV supposed to have an under engine splash shield?
  8. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Hello, I installed my Honda OEM Splash Guards today. I have a question on the two front splash guards upper outer screws. Are those supposed to get tight, or only hand tight? It seems they keep never-ending screwing in without any tension. I definitely do not want to strip the threads...
  9. Accessories
    Hello everyone! Wife got a new 2018 CRV EX about a month ago and I finally got around to installing the splash guards. Everything seems to have gone fine, except one screw does not get as tight as the rest. it's the top screw of the front driver's side guard. This is the one you puncture...
  10. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    Are splash guards worth it on the '17? There's no painted area they would protect.
  11. Trading Post
    I bought a set of splash guards and it turns out the rear ones do not fit the Sport bumper I have. They are made to fit only the stock bumper (which I verified on my old bumper). So selling the rear set only - $30. They come with the black screws needed to install them.
  12. Accessories
    I would be most grateful if someone could help me find a set of front splash guards for an 2005-06 CRV (08P08-S9A-100A, or 08P08-S9A-300A in Canada), which are 'discontinued' with Honda. I know that the ones for the 2002-04 models (same part number minus the 'A' at the end) don't fit; and of...
  13. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I just received my set of splash guards and noticed the rear one will not fit my sport bumper. Did some search but can't find anything. Does anyone know if splash guards for rear sport bumper even exist?
  14. Do-It-Yourself / Mods
    Hi all, Im trying to figure out how to change the splash screen on my CRV's nav. I have the 6.62a teal disc version. I tried following numerous old threads and links but all the links seem dead. Can anyone help me go through this.
  15. Accessories
    Mom wants splash guards. Had seen lots of people say the factory ones are an easy install. couple reviews i've seen, though, say they think the guards are smallish and may not be effective. anyone using anything other than factory guards for better protection?
  16. Gen 5: 2017-2021 (UK 2018-2022) CR-V
    I ordered splash guards for my very new EX-L and will put them on myself. Is there anything I should know about the best way to add them? The instructions make it seem simple, but I'm wondering about the best way to do it and not have to worry about the new holes I'll screw into the body...
  17. Gen 2: 2002-2006 (UK 2002-2007) CR-V
    Upon rear disc replacement i have found that the rear brake splash guards on our CRV II have rusted away. Have bought new ones from honda and all new park brake shoes etc. But can anyone help regarding removal of the old. I cant see how to replace without dismantling half of the car :( Are...
  18. Gen 1: 1996-2001 (UK 1995-2001) CR-V
    Does anyone know the part number, specifications or where to get the clips that hold the engine splash shield on? This is the one underneath the front where you have to take off the guard bar. I'd rather not pay the $4 each price that the dealer is likely to charge. Thanks.
  19. Miscellaneous / General CR-V Discussions
    Really off question for the 05 owners. Should there be a splash guard by the steering rack? I noticed while washing my car today that there is literally an open area where the steering rack connects to the control rod. Upon looking further into the well, I see some mounting points that may have...
  20. Gen 4: 2012-2016 (UK 2012-2017) CR-V
    When I change oil, I broke one of the four screws that hold the splash plate for the oil tank. Anyone knows where I can buy a replacement screw? It has to come with a U shape clip. Thanks.
Top