Honda CR-V Owners Club Forums banner

steel

  1. TPMS part number for steel wheels

    Gen 3: 2007-2011 CR-V
    Does anyone know the OEM Part Number for TPMS Sensors for a 2008 Honda CR-V LX AWD with steel wheels?
  2. Steel brake lines

    Problems & Issues
    So the right rear brake line on my daughter's 2002 Accord sprung a leak. I had topped off the brake fluid twice in the past two weeks, and took a look underneath. Turns out the steel line was poorly routed on these Accords, exposed to water, salt and road rash, and it's common for them to rot...
  3. 1999 CRV bent steel wheel rim, alloy replace

    Problems & Issues
    Hi my 1st post. In my 99 I have a bent stock steel wheel rim on the rear that vibrates a bit. When I bought the 99 used, it had no spare. Someone offered me an alloy rim & new tire off of an 01 CRV for $50. I wanted to know from someone learned if mixing an alloy wheel with 3 stock steel...
  4. hubcaps over the standard 16" steel wheel

    Gen 4: 2012-2016 CR-V
    3rd time CRV owner here... Just bought a certified 2015 LX with the standard 16" wheels. My last vehicle (2010 Ford Escape -hence why I went back to buying CRV's :Darn:) had "black" wheels and I really liked the look. However, it turns out wheels are SUPER expensive. :doh: Anyone have experience...
  5. Will 15x8 steel wheels fit?

    Gen 1: 1996-2001 CR-V
    Will 15x8 inch black steel wheels fit with stock sized tires without lift? 1999 AWD CRV
  6. OEM Steel Wheels

    Tires, Wheels, & Suspensions
    Hi everyone. I'm shopping around for a set of 17" steel wheels to wear my new winter tires. I'm wondering if anyone knows the specs of the Honda OEM 17" steel wheels? My dealer doesn't seem to have any of the specs - only the part #: 08W17-PC4-300 If anyone knows the following details that...
  7. FS First Generation Honda CRV OEM Exhaust Pipe Finisher Stainless Steel !!

    Trading Post
    Nearly impossible to find now, an OEM Honda stainless steel exhaust finisher for the first generation Honda CRV (1997-2001). Original owner, just removed (so used condition). Original bolt should be replaced with a new stainless bolt (I'll do it if i have time). Approximately 4.5 inches in...
  8. Changing steel wheels to alloys - 2007 LX

    Gen 3: 2007-2011 CR-V
    I just bought a 2007 LX with factory steel wheels that are pretty ugly, I'm afraid. I thought it would be no big deal to buy some used factory alloys and change them out, but my initial research raises questions, which are: Some companies (who sell wheels) say the existing Honda TPMS sensors...
  9. 2001 CRV steel wheels

    Tires, Wheels, & Suspensions
    Does anyone know what steel wheels fit the 01 CRV I have alloys and love the steel rims but can't find any .., anywhere
  10. Body work opinion 2015 crv modern steel met.

    Problems & Issues
    This is on 2015 CRV which got hit while parked. Fender dented and edge of door got damaged when opened as a result of the fender being bent in such a way that it interfered with the door opening. Bought a new fender from dealer for $308. Delivered it to a body shop. Deal was $800 to install and...
  11. Gunmetal vs Modern Steel

    Gen 5: 2017-Present CR-V
    Are there any decent side by side comparisons in sane lighting? Everything I've seen so far is either full of glare or an overcast sky. Same thing when I go to a dealer, which may not even have both in the lot at the same time. Also, is there any way to get Gunmetal with black cloth?
  12. 1st gen 16" steel wheel options?

    Tires, Wheels, & Suspensions
    looking for tires I have found allot more options in 16" than 15". im wondering if there are some common 16" steel rims i can grab at the junkyard that will fit a 1st gen crv with a similar backspacing?
  13. FS: CRV 2017 2018 Stainless Steel Door Sill Scuff Plates 4 PCS

    Trading Post
    I have an extra set of these if anyone wants. $30 shipped usps, paypal
  14. any fitment issues running 16" steel wheels on 4th gen (2012) EX?

    Tires, Wheels, & Suspensions
    I bought some 16" steel wheels with winter tires off craigslist from a guy who said he had them on his 2014 CRV. I installed them on my wifes 2012 EX and the front caliper grinds a little bit as it turns. It is scraping on the inside front near the wheel studs. All the sites I have checked...
  15. Different wheel lug nuts for steel vs aluminum oem wheels '08 crv?

    Gen 3: 2007-2011 CR-V
    Hi, I've searched the interweb and this forum, and keep getting different answers. For an '08 crv, are there different wheel lug nuts for steel vs aluminum oem wheels? I got a set of oem honda steel wheels for my girlfriend's '08 for winter tires, and have been using the same wheelnuts from her...
  16. Steel rims for winter

    Gen 5: 2017-Present CR-V
    MACPEK Steel Wheel 5-114.3 40/71.5 i can see that the offset is 40 which is 45 in oem wheels i wonder if this will work good or should i get a different one with the same offset as oem?
  17. Steel or Alloy?

    Tires, Wheels, & Suspensions
    Does it make a difference in MPG? How about handling? I have Honda Steel Wheels.
  18. 17" Steel Rims for 2017 EX

    Gen 5: 2017-Present CR-V
    Folks; Up here in the GWN snow tires rule. Most of us put them on steel rims for ease of changing. What size steel rim should go with a 235/65-17 tire?
  19. Genuine Honda 2017 CR-V Brushed Stainless Steel Exhaust Tip Finisher 08F53-TLA-100

    Gen 5: 2017-Present CR-V
    Hi everyone, I just purchased from Brown's Honda City's Ebay store a pair of original Honda exhaust tip finishers for my new 2017 CR-V (LX Base trim model). Part # 08F53-TLA-100. Here are a bunch of photos. Cheers!
  20. Factory Steel Wheels 'cold weld' to hubs both front & rear

    Tires, Wheels, & Suspensions
    Both the all-seasons and the winter tires are mounted on OEM Honda 16" steel wheels for our daughter's '13 LX. 4 original to the car, 4 take-off's purchased last year. I had one winter wheel that fought me last Spring when she returned from school, and I ended up lowering some weight on it and...
Top