sway

Hello! I have a few things I need to figure out for my car. 1. A few weeks ago, I was driving uphill at about 60 mph and it seemed like my CR-V was having trouble shifting up (not sure which gear it was trying to shift to). The engine sounded louder than usual. When I came to a stop off the...

My 2007 CRV AWD is riding a little rough these days with 150k miles. Ride is bouncy, chirps some on turns, clunk when turning wheel all the way to left. I was thinking of doing all the stuff in the thread title at the same time, then get an alignment at the shop. Any reason not to do all this...

Hello Has anyone upgrade their rear sway bar on their gen 5 crv? Im a huge fan of upgraded rear sway bars...ive done it all my cars that i have owned. The only one ive found available the gen 5 is...

Does anyone else seem like the crv sway and bounce a lot? I know my tundra had a huge issue like that so I installed the trd sway bar. It helped a lot. Is there something like that we can do to our crv to help with body roll?

Does anyone else seem like the crv sway and bounce a lot? I know my tundra had a huge issue like that so I installed the trd sway bar. It helped a lot. Is there something like that we can do to our crv to help with body roll?

I just finished installing a set of coilovers on my daughter's CRV. The rear sway bar end links are too long now that it's lowered. I remember reading about this problem a while back, but I've been searching for the last 30 minutes for the answer with no luck. What sway bar end links will I...

Is this a sway bar link? Honda Service didn’t seem to notice it wasn’t connected. Thanks.

I have a 2009 cr-v with 150k. I took it to a mechanic and they said front struts and sway bar links that are causing noise when turning. They said the ball joints are fine. But with that many parts torn out, should I do upper/lower ball joints while in there? Which wears out faster (upper or...

Is it normal when shifting from park to reverse or reverse to drive etc for it to feel like as if for example when someone pushes your car from behind really hard it rocks back n forth 3 or 4 times. That's what it feels like when I want to back up for example when shifting it to reverse unless...

How difficult was it? How much did the bushings cost? Any special tools required?

My 2008 CR-V is making the kind of noise that almost sounds like failing sway bar links, however when I tried to take a visual, I just don't *see* any thing abnormal, for all four links, they don't show any play if I try to grab on the links, no matter how hard I was trying. If I use a pry bar...

I need to replace my sway bar links. Having never done this before, when unbolted, is the sway bar going to pop or jump on me? On a side note - I *know* I posted a question about "name this part" - and included a picture of the sway bar link. Dang'd if I can find it now. Is it just me with...

So I know there were some aftermarket rear sway bars that used to be available for the Gen 2 but I looked up a bunch of websites and it seems that I didn’t have much luck finding any. So I took a shot, did some research on the same head Honda Element as my CRV (2006) and ordered the rear sway...

I have had a popping in the front end of my 2007 for a while now. The popping sound occurs when going over speed bumps and most any other bump or hole in the road. It has gotten progressively worse over time. The dealership recently was able to diagnose it as me needing a sway bar link kit...

Has anyone tried this setup? Sent from my SM-G920V using Tapatalk

Hello, everyone! I'm at a crossroads with my beloved 97 CR-V. She's got 315,000 miles, and, mechanically, everything is in great shape. Unfortunately, I was told that the sway bar and several other parts in the rear suspension are rusted through, and it's unsafe to drive. I've also been given an...

Loving my new CR-V, but I want to improve turn-in response and cornering capability a little more by adding stiffer sway bars front and rear. I did the same to my '14 Accord Sport by putting the TLX sway bars on the car and it made the handling perfect for me without compromising ride comfort...

Hello, I was wondering if anyone knows the sizes of the front and rear sway bars on the 2010 CR-V EX-L ? I'm thinking of up grading the bushings. Thanks

Hi, I have a few towing questions for all the Honda owners who have experience towing a trailer. I have a 2013 Honda CR-V ExL with AWD and just ordered, -and will soon be towing, a 5x5x10 wells cargo enclosed utility trailer to travel to nearby art shows in the Midwest (flat land) only about...

Hi. Trying to help my dad out with his 05 CR-V. Sway bat bushings are toast. Getting that clunk. I measured his front sway bar and it is like a little over 27mm I have not seen any specific polyurethane bushings available for this year. Anyone running some poly say bar bushings on a 05?