[Aegean]

What does not work:

• Phone buttons on the steering wheel. I have not figured out how to make them work.

If you want to use the Voice, Answer and End buttons you must hardwire them into the canbus SWC analog input. (If there is one). The wire you need to connect into can be found by removing the plastic panels surrounding the steering wheel column and accessing the SWC connector which houses the wire. Once you have located the connector you must splice into pin 3. Wire color is normally Yellow in the CRV but may vary by vehicle.

 

[Aegean]

I also dont have sound there is a wire blue/white with amp_CON tag, where should i connect it, i have this radio

The Con tag blue/white should be connected to red wire pin 21 of radio connector A, the one with 24 pins. This should power the amp and you get sound.