Does anyone know what the part number is, for the chrome Honda emblem on the steering wheel, middle of drivers airbag? Mine is starting to flake and the coating is peeling off. I hate having to looking at it like that and would really like to replace it, if possible. Any help would be greatly appreciated.
2009 CR-V Chrome Honda emblem on steering wheel peeling.
Join the discussion
Recommended Reading
-
Renewed Coolant and have problem
2007-2011 Official Specs, Features, Etc. (Gen 3)Hi Newbie, as per title I followed all the steps to the letter but on start up the temp gauge is central but heaters blowing cold and as per the bottom radiator hose is cold but top one hot. Ive tried squeezing /purging top hose with expansion tank lid off but now at a loss. 2009 diesel CRV 2.2...- 4
- 96
-
Throttle Body & Pedal Sensors
2007-2011 Official Specs, Features, Etc. (Gen 3)Hello every one I would like to know if someone has the output voltage or voltage graph for CRV 2010 Throttle Body & Pedal Sensors . the problem is that when the pedal is pressed for about 20%, the throttle plate moves backward (closes) then moves forward (opens) resulting in performace...- 0
- 39
-
2008 CR-V Moon roof gasket and track care .
2007-2011 Official Specs, Features, Etc. (Gen 3)Hello everyone, I have searched around in the forums but not finding a thread that really answers my question. I have a 2008 CRV and the moon roof is in good shape; I would like to keep it that way. Is there any preferred grease, oil or spray you can put on the gaskets to keep them supple and...- 7
- 94
-
TEAK · updated
-
Are Honda parts "made for Japanese built vehicles" compatible with American built vehicles?
2007-2011 Official Specs, Features, Etc. (Gen 3)I have a US produced 09 crv and I have wondered if the "for Japan built vehicles" parts are compatible with my US built vehicle? I have looked at two differently labeled Honda oem parts and they seem to be identical except for the slightly different oem part numbers and the Japanese specific...- 7
- 692
-
2011 oil filter wrench that does not suck?
2007-2011 Official Specs, Features, Etc. (Gen 3)I bought a cheap one from amazon it worked fine for few years but now it slips on the filter. It's a filter cap wrench. 64mm i think? I never thought much of the oil filter wrench since it does not clamp down on the filter until you turn it by then your out of room to keep turning. Motivx...- 1
- 79
Join now to ask and comment!