Honda CR-V Owners Club Forums banner
  • Hey everyone! Enter your ride HERE to be a part of December's Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi guys!

Just got a '20 CR-V that I like a lot. Want to have some fun with it, so looking at some wheels. Looks like the stock wheels are 18x7.5J +45 offset? Set that I'm looking at is 18x7.5J +48. I assume I could simply run a spacer, but ideally I'd like to avoid that for some reason.

You guys know if there's 3mm of clearance toward the strut etc. into the wheel well?

Thanks!
 

·
Registered
2016 CRV EX-L
Joined
·
165 Posts
On my 2014, the oem offset is +50, I had some accord +55 and didn't need spacers. I'd bet you wouldn't either. I did notice a slight difference when turning full lock to lock, but it wasn't significant. No rubbing etc of any kind.

I can tell you most of the people I talked to recommend not using spacers if you don't have to. They don't seem to have a good reputation within the industry.

Cheers
 
1 - 3 of 3 Posts
Top