Honda CR-V Owners Club Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1 (Edited)
Gonna put 2in spacers on 03 crv, don't wanna go all out n have to replace parts all the time due oem can't handle the heavier tire/wheel? What's the biggest size that'd still b safe on OEM. I am replacing the struts while installimg spacers.
Let me clarify what I ment by spacers, I ment on the strut towers. Any ideas I'm all ears want beefier look
 

·
Registered
Joined
·
106 Posts
I don't know the answer to your questions, but, you do realize that spacers that big (really any size) means you'll need bigger lug studs? I looked at doing that on my 2014... not going to happen. Honda made it very difficult to change those studs, they don't just get knocked out and a new one put in, as they won't go out the back.

the entire wheel and bearings, axles etc etc have to come apart to get the hub out to get to the back of it.

Maybe you've already seen that and it's no issue for you?

Cheers, good luck with it.
 

·
Registered
Joined
·
3,182 Posts
2" spacers will likely come with lug bolts/nuts. Bolt the spacer to the hub, bolt the wheel to the new spacer.

2" wheel spacerers
 
1 - 3 of 3 Posts
Top