I want to use the OEM cruise control switch to run my fog lights. Does anyone have a diagram for the switch or know what the different wires do?
![Electrical wiring Cable Electrical supply Electronic component Circuit component]()
![Automotive tire Output device Audio equipment Gas Circuit component]()
I believe the Black is ground for the led and red is the power for led. The green/sliver and green/yellow are the trigger and the red/black is just a dead lead. I don't know if polarity matters with the green/sliver and green/yellow for what should be used for ignition power and one for fog power.
![Circuit component Gas Electrical supply Composite material Machine]()
Did some testing and figured out the wires I needed.
![Font Rectangle Circuit component Networking cables Cable]()
Also had this green bulb out on new switch: Part # 35851-S5A-A01 or T3 style bulb
![Outerwear Helmet Toy Green Headgear]()
I believe the Black is ground for the led and red is the power for led. The green/sliver and green/yellow are the trigger and the red/black is just a dead lead. I don't know if polarity matters with the green/sliver and green/yellow for what should be used for ignition power and one for fog power.
Did some testing and figured out the wires I needed.
Also had this green bulb out on new switch: Part # 35851-S5A-A01 or T3 style bulb
