Honda CR-V Owners Club Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi guys,
I would like ask you if Ryco Z411 is compatible with my CRV 1997 4WD? I was given this filter in the shop, but it looks a bit different to the old one ( a bit smaller). On the Ryco website they say I should use Z79A, although they are very similar except height.
Thanks
 

·
Registered
Joined
·
75 Posts
If you look on Ryco's website you'll find that the Z411 has a 64mm diameter rubber seal whereas the Z79A has a 63mm diameter seal. Chances are, it should still work fine, but there is a small possibility of a leak developing since the Z411 has a slightly larger rubber seal than the Z79A intended for the CR-V. I would check for leaks, and if you don't have any oil leaks, you should probably be fine.
 

·
Registered
Joined
·
1,592 Posts
Check out RockAuto.com for quality Denso filters. I use them!
 
1 - 3 of 3 Posts
Top