Honda CR-V Owners Club Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Forum,

Just purchased a 2011 EX (uk spec) Gen 3 2.0 petrol engined CRV and am looking for a workshop manual to maintain the car myself as far as possible. Are here any recommendations on what is available please?

Dodge
 

·
Registered
Joined
·
6 Posts
Discussion Starter #2
Anyone?

There must be other Gen 3 owners out there who need access to a workshop manual?

It's a UK spec (2.0 petrol) engine version..

Anyone got any ideas?
 

·
Registered
Joined
·
76 Posts
All of my comments apply to the US version.
I looked at the FSM in the dropbox and it is dated 10/2006, First Edition. It's not clear what years it applies to.
I had a 2008 EX CRV, and still have my hardcopy 07-08 FSM. Now I have an 11 EXL CRV and have been looking for the updated 2007-2011 FSM. It seems there is a 2007-2010 FSM, but I have not found one that covers 2011. These FSMs can be found on eBay, and probably at helminc.
In the dropbox FSM, the recommended oil is 5W20. This would be correct for my 08.
However, that would not be correct for the 11, as it calls for 0W20 oil.
My hunch is that the dropbox FSM applies mostly to 07, due to the 10/2006 publication date.
When I get a chance I'll check the date on my 07-08 FSM and will update this post.

Edit/update - At helminc, there is no FSM listed for 2007. For 2008-2011, the same FSM is listed for every year - p/n 61SSWA04, $175.

Edit - My 2007-2008 FSM, p/n 61SWA01, has a publication date of 9/2007, which is consistent with 07-08 coverage. I think this confirms that the dropbox version applies to 2007 because of its 10/2006 publication date.
 

·
Registered
Joined
·
6 Posts
Hi guys
i have a 2011 Gen 3 CRV i-DTEC 2.2 Advance (ita).
I need the pinout wiring datasheet of the factory 2din radio/Navi unit (model BB730PO), that is a little different from the one (BB717PO) explained on the US Workshop Manual.
Anyone can help me?
 
1 - 9 of 9 Posts
Top