This is a MOD for those of you WHO DON'T HAVE A SWITCH STALK with FOGLIGHTS.
1. Wire up a 2nd relay like this:
A) 85 = Quick splice YEL wire from ebay switch, Broken Lines
Ebay switch:
B) 86 and 87 = Tap to Body (GND)
C) Quick Splice Headlight Connector #8 YEL to feed to 2nd relay #30. This will basically be to ground #8 once relay is energized.
Genuine Honda HR-V Cargo Net with Odyssey Mounting Hardware retrofitted onto my newly purchased 2010 CR-V EX-L AWD with Navigation. I realized my CR-V only came with floor nets rather than tailgate nets. Floor nets, however, aren't very useful when groceries or other items are placed on the...
I'm installing an OPT7 LED Interior light kit in my 2012 Honda CR-V and I need to tap into the interior dome light wiring. Specifically, the circuit that turns the dome lights on when a door is opened. The best access points are either at the fuse box or the map lights console above the rearview...
I just purchased a 2019 EX which I am really enjoying, but I didn't realize how much I would miss the power liftgate that was on my previous vehicle. I am an older woman, about 5'4", and am finding it difficult to reach so high to grab the molded handle and lower the liftgate. Is there someplace...
Hi all, wondering if anyone can tell me how to remove the console panels to access the gear shift? I have an automatic CRV VTIS 2019, AWD. I'm finding the gear shift very stiff and notchy and need to be able to soften this, but don't know what needs to be removed first to access the parts...
