Honda CR-V Owners Club Forums banner

Exhaust outlets uneven

1485 Views 7 Replies 7 Participants Last post by  TheDarkKnight
Picked up a 2019 Touring recently and when picking up noticed left chrome exhaust outlet was about 3/4 inch lower than the right [gap between the top of outlet to cutout in bumper finisher]. This Touring was built in Canada, and before I return to dealer am just wondering if anyone has noticed something similar? This is easily noticeable, at least to me, because of the excessive gap between the outlet and bumper on the one side, which is 1 5/8 inches.
1 - 8 of 8 Posts

· Registered
Joined
·
265 Posts
Picked up a 2019 Touring recently and when picking up noticed left chrome exhaust outlet was about 3/4 inch lower than the right [gap between the top of outlet to cutout in bumper finisher]. This Touring was built in Canada, and before I return to dealer am just wondering if anyone has noticed something similar? This is easily noticeable, at least to me, because of the excessive gap between the outlet and bumper on the one side, which is 1 5/8 inches.
Congrats for your new car! Should be same on both side. Have them adjust it.

Sent from my SM-N920I using Tapatalk
 

· The. Admin. Istrator.
Joined
·
11,371 Posts
Honda quality is not the same as it used to be...
Depends on where your car was manufactured/assembled. If you think the quality is shot, get rid and buy something else.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top