Honda CR-V Owners Club Forums banner
  • Hey everyone! Enter your ride HERE to be a part of December's Ride of the Month Challenge!
1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hi has anyone on here tried the eibach springs to do a lift? Or spacers any pictures would be great. This is my 2006 top spec gen2 in need off a lift . Also has anyone got some tough torque steel wheels for sale?
Many thanks
Gary
136593
 

·
Premium Member
Joined
·
2,694 Posts
I was going to say, try HRG Engineering for a lift kit:


...but I noticed you're in the UK. I don't know if they would ship to you or if they did, how expensive it would be.

You will need adjustable control arms for the rear and camber bolts for the front, so you can get your camber adjusted front and rear. If you do a taller lift, you should also get the subframe spacer kit, so your axles don't take a beating. (It "lifts" the body/drops the subframe so the axles stay more in line.)
 

·
Registered
Joined
·
4 Posts
I was going to say, try HRG Engineering for a lift kit:


...but I noticed you're in the UK. I don't know if they would ship to you or if they did, how expensive it would be.

You will need adjustable control arms for the rear and camber bolts for the front, so you can get your camber adjusted front and rear. If you do a taller lift, you should also get the subframe spacer kit, so your axles don't take a beating. (It "lifts" the body/drops the subframe so the axles stay more in line.)
Can you please tell me which is the optimal size of lifting for conda crv 2002 2.0 not to using subframes?
i want to lift it but afraid to damage axles... im from Georgia caucasus, we have here guys makeing spacers, but they are not making subframes, they didnt knew that they are needed :))) if i lift my car 1.5 inches is it necessary to lift with subframes too ?
thank you in advance
 

·
Registered
Joined
·
1 Posts
Can you please tell me which is the optimal size of lifting for conda crv 2002 2.0 not to using subframes?
i want to lift it but afraid to damage axles... im from Georgia caucasus, we have here guys makeing spacers, but they are not making subframes, they didnt knew that they are needed :))) if i lift my car 1.5 inches is it necessary to lift with subframes too ?
thank you in advance
Hello! I am new to this Forum but have recently purchased a Honda CR-V 2002, 2.0. I have also been looking to lift it with spacers as springs are hard to find or too expensive with shipping costs (based in Europe). 2 days ago I have purchased the 1.5" lift kit from HRG Engineering which should arrive soon! According to HRG Engineering you do not need Camber adjustments or subframe lifts etc with their 1.5" kit. Any higher would require this though.

Will send pictures before/after after they have arrived and installed!

Greetings!
 
1 - 5 of 5 Posts
Top