Honda CR-V Owners Club Forums banner

Headlight adjust touring

7196 Views 9 Replies 6 Participants Last post by  pookh007
Need help with headlight adjustment on touring model. Is it easy to do it by yourself?:confused2:
1 - 10 of 10 Posts
level ground find the adjustments located on the top and back. Also there is a thread already on this that can be searched. if tagged right.
Couldn't find that's why i asked. Thank you
Need help with headlight adjustment on touring model. Is it easy to do it by yourself?:confused2:
I don't think you can on the Touring Model
Bumper Automotive exterior Auto part
Need help with headlight adjustment on touring model. Is it easy to do it by yourself?<img src="http://www.triumphrat.net/images/smilies/confused.gif" border="0" alt="" title="Confused" class="inlineimg" />
Theres a bolt on top to raise and lower the touring lights
Silver one on top in the pic i posted

Dont overturn either way and pop it out
See less See more
Thank you and also can it be turn left or right or it just up and down?

Sent from my SM-G970U using Tapatalk
Thank you and also can it be turn left or right or it just up and down?

Sent from my SM-G970U using Tapatalk
clockwise as you look from the driver's seat to pick them up

Отправлено с моего SM-N950F через Tapatalk
I Suggest to mark b4 ever turning so if you do make a mistake you got a reference point.
Thank you and also can it be turn left or right or it just up and down?

Sent from my SM-G970U using Tapatalk
The adjustment is just the vertical for the LEDs. My LEDs where set from factory way too high. Even on the low beam during snow storms it would blind me before the adjustment. Per the dealer's tech, I just used a big Phillips screw driver as a "gear" to turn the adjustment gear- i.e. kinda like a transmission gears. I did not adjust the bolt nor turn the bolt. Hope that is clear
Thank you. That is exactly what i wanted to read. Mine headlight aim too high and to the right

Sent from my SM-G970U using Tapatalk
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top