Honda CR-V Owners Club Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Good day everyone!

I've identified a substantial ATF leak on my 2002 4WD LX. With snow on the ground, I've not yet had a chance to rip it apart, but have taken some photos with the limited space; I've looked on various websites from the basic NAPA's etc all the way through to Rockys and cannot find this specific part.

Looking at the lines and the filter, I am tempted to replace all the parts at once, even though there is only one leak.

The location of the leaking pipe is certainly more towards the drivers side, but I've attached various pictures showing as much of the ATF cooling lines as possible without removing parts at this stage.

As well as sourcing parts, or at least part numbers, I'm curious as to how to achieve the work, as it's all looking pretty tight down there!

Note: The photo will yellow & red markup is where the leak appears to be coming from.

As always, your advice & thoughts are very welcome!

IMG_0590.jpg

IMG_0698.jpg

IMG_0702.jpg

IMG_0704.jpg

IMG_0708.jpg
 

Attachments

·
Registered
Joined
·
2,256 Posts
1 - 6 of 6 Posts
Top