[billyrule]

Hey Good Folks, (I had to use pastic zip ties to keep metal plate from hitting the road)

I was driving and I noticed my metal plan protector was loose (hitting the road). I have about 4 Rivets missing. What rivets do I need? Do you know if they are removed during an oil change about 2k ago.
thanks in advance

 

[fubarnow]

Hope This Helps--This at Amazon

 

[fishycomics]

https://www.crvownersclub.com/forum...etc-gen-5/170105-pan-under-has-two-parts.html

Bolt cover screw type 90105-tba-a00 screw
90674-ty2-a01 1/4 turn bolt

10mm for the bolt any hardware store has them how many about 5 needed. I use some washers larger so they can hold better if asked

IF that is what you are showing us in this topic?

 

[billyrule]

Thanks fubarnow and fishycomics !

 

[williamsji]

The surface of that metal pan looks pretty scraped up. Where you been driving??

By the way... I LOLed (in a positive way) at the tie-wraps.... because I have a huge box of them and I use them as temporary or permanent fixes for all manner of things in and around our home.

 

[BBLee]

some incompetent mechanic did not put back the screws or did not put them back properly after the oil change. You don't use plastic clips in those.
go easy when your off-road.... you might break something sooner or later.arn:

 

[fishycomics]

Correct on that I been there with tie wraps as a temp just do not leave a giant loop or the next thing you will hear is what was that my pan down the road.