Honda CR-V Owners Club Forums banner
1 - 20 of 58 Posts

·
Registered
1999 Honda CR-V 5 speed
Joined
·
53 Posts
Discussion Starter · #1 ·
I'm new here but not new to Honda's. We just picked up a 2012 Acura TL. Which means my Integra will finally get the B20 Vtec put into it. Today I decided to take the audio crap out of the Integra and put it in my CRV. I will be driving the CRV mostly and the Integra is way loud after I put a header on and it is going to get even louder. I will post photos of the build as I go. It will be two Kicker amps, Focal separateds in the front, Kicker coaxels in the back and a Kicker 8" L7 sub. I'm going to make it all fit under the picnic table. I figured the box design out today and will start the build on Friday. Once I build the box I will figure out the amp rack. It should be fun.
 

·
Registered
1999 Honda CR-V 5 speed
Joined
·
53 Posts
Discussion Starter · #6 ·
Had to make the bottom of the sub box using fiberglass so I would get more volume and mounting depth for the sub. It is a .5 cubic foot box. Went ahead and made my brackets to mount the box to the car. I had to get creative with the amp rack to fit both amps in there in front of the sub. I'm tired so I will post more photos tomorrow.
 

·
Registered
1999 Honda CR-V 5 speed
Joined
·
53 Posts
Discussion Starter · #7 ·
  • Red Rectangle Material property Textile Leather
    Red Brick Rectangle Rock Flesh
    The box is done except for making it pretty. I going to attach a nice Oak piece that will be stained with black stain and apply a few Coates of poly. I finalized how the amps will be mounted. I had to get creative to get two amps to fit in the space. I will post a few photos of it soon.
 

·
Registered
1999 Honda CR-V 5 speed
Joined
·
53 Posts
Discussion Starter · #10 ·
Tool Metal Tool accessory
I could not use a mount on the bigger amp and had to mount it to the car itself on top two mounting points. On the bottom two I needed to make custom spacers with the correct angle. I made them by glueing 4 pieces of ABS plastic together. Then using a file to make the angle.
 

·
Registered
1999 Honda CR-V 5 speed
Joined
·
53 Posts
Discussion Starter · #20 ·
Car subwoofer Loudspeaker Audio equipment Subwoofer Computer speaker
Audio equipment Computer speaker Car subwoofer Loudspeaker Subwoofer
Audio equipment Car subwoofer Loudspeaker Computer speaker Subwoofer
I removed the Focal's from my Integra the surrounds where screwed up. I had never tried to put new ones on a speaker before so I gave it a shot. The hardest part was figuring out what size to order. It was pretty easy and turned out nicely.
 
1 - 20 of 58 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top