Honda CR-V Owners Club Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
I converted my fog lights to LED and decided I wanted more light. I saw there was enough space in the grill beneath the Honda emblem for a narrow 21 inch LED light bar. I took the whole front clip apart. I carefully cut the lower part of the grill out and mounted a 21 inch light bar. It turned out great, It is recessed inside the grill and it looks awesome. It took me two days to get it done. The hardest part was mounting the light so it would not move when I am driving without impedeing the radar unit; the second hardest part was running the wiring into the cabin. I finally decided to take the front fender off and ran it thorough and existing "empty" grommet directly above the hood release cable. I spent a lot of time searching the internet for help and came up with limited results, so alot of my time was spent on trial and error.
 

·
Registered
Joined
·
895 Posts
Good job. Looks nice and clean.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #5
Thanks. This light is incredible it overpowers my brights IMG_7024.jpg IMG_7029.jpg IMG_7038.jpg IMG_7039.jpg ; it completely lights up the dark Alaskan roads. I will take some pictures tonight of the road with and without the lightbar. Here are some better pictures, as well as some pictures of how I ran the wiring from the engine compartment to the cabin
 

·
Registered
Joined
·
20 Posts
Discussion Starter #6
Here are two sets of night pictures with and without the light bar on (brights are on in all pictures). Out on the highway and on the street I live on

IMG_7050.jpg IMG_7051.jpg IMG_7058.jpg IMG_7059.jpg
 

·
Registered
Joined
·
20 Posts
Discussion Starter #9
1 - 9 of 9 Posts
Top