Honda CR-V Owners Club Forums banner

1 - 6 of 6 Posts

·
Registered
2001 Honda CRV
Joined
·
10 Posts
Discussion Starter #1
need to get my rear license plate frame off, for paint. any suggestions other than snapping the mounts off?
 

·
Registered
2020 CR-V Touring 2WD
Joined
·
294 Posts
If it were mine I would turn the mounting screws counter clockwise. Is yours different?
 

·
Registered
2001 Honda CRV
Joined
·
10 Posts
Discussion Starter #3
If it were mine I would turn the mounting screws counter clockwise. Is yours different?
there arent any screws its just clips... well from what i can see. i took off the rear panel and the clips are all facing in opposite directions.
 

·
Registered
00&01 CRV
Joined
·
160 Posts
OP, take a look. You need to remove the inner panel of the tailgate, and there are 4 10mm nuts. Be careful, the mounting is junk. Honda blew it with this design. Let me know if you have any questions.
 

Attachments

  • Like
Reactions: Lochinvar

·
Registered
2001 Honda CRV
Joined
·
10 Posts
Discussion Starter #5
g
OP, take a look. You need to remove the inner panel of the tailgate, and there are 4 10mm nuts. Be careful, the mounting is junk. Honda blew it with this design. Let me know if you have any questions.
goated 🙌🏽 will try it once i get to the junk yard!!
 

·
Registered
00&01 CRV
Joined
·
160 Posts
I got mine out ok, and broke two off when I set it in the car. I will find a way to fix it though.
 
1 - 6 of 6 Posts
Top