Honda CR-V Owners Club Forums banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello

I would like to replace my mirrors with the one which have power fold option. I have bought the switch.

Current mirrors only have 3 connector pin. I plan to buy the whole unit and tried to search on eBay. There were 5 and 7 pins version. I'm not sure which one should i choose and what else should I purchased to complete this upgrade.



Thank you.
 

·
Registered
Joined
·
469 Posts
If your trying to do as Factory setup that is part of the wiring harness and not a simple job as alot of stuff has to be take apart to do this. You might want to look at youtube to see if someone has done it and recorded on video to watch if this is possible to do.
 

·
Registered
Joined
·
26 Posts
I will link my heated mirror write up since you will need to wire up the same connectors in order to add wires and connections.

Link: US spec - 2004 CRV LX - Adding Heated Mirrors

The connectors are the same so you will have too repin the 3 wire too a 6 pin connector to make it work.
 
1 - 3 of 3 Posts
Top